Retrofitting bi xenon headlights from polo gti to polo 6r
Posted: Mon Jul 24, 2017 5:31 pm
Hello ursers I'm currents in a project to fit bi xenon headlights from polo gti to polo 6r tsi
I've got the correct harness and yesterday I plugged it in to give it a try and everything works except leds I then removed harness and put the power on individual terminal I plug in a variable voltage out put to a lower voltage and test the leds again. This time it works. Anways I can get everything to work including main bean full beam and indicators, all I need to is the input voltage for the leds to work I think it's between 4 and 6 volts. As once I know I'll put a voltage reducer from the battery and connect up to the harness to get the leds running permanently off the battery.
Anyway that is my problem hope someone can help me
Regards
Joe
I've got the correct harness and yesterday I plugged it in to give it a try and everything works except leds I then removed harness and put the power on individual terminal I plug in a variable voltage out put to a lower voltage and test the leds again. This time it works. Anways I can get everything to work including main bean full beam and indicators, all I need to is the input voltage for the leds to work I think it's between 4 and 6 volts. As once I know I'll put a voltage reducer from the battery and connect up to the harness to get the leds running permanently off the battery.
Anyway that is my problem hope someone can help me
Regards
Joe