UK-POLOS.NET - THE VW Polo Forum

Wondering if anyone has any info on the retrofit of front parking sensors to a 6R, mine's a 1.4 match with rear parking sensors from factory and headlight washers (if that matters) and was considering getting front ones along with a new front bumper.


Sent from my iPhone using Tapatalk

there is no 6R bumper with front PDC holes so you'll have to drill some holes yourself.

You would be cheaper hanging around waiting for a bumper of a rear ended SEL or so. Costs can get a bit out of hand when retro fitting front parking and OPS, it cost me the best part of £350 to retro fit, as close to factory as possible, front sensors and OPS to my 2011 Audi S4 - that was with me buying new VW Group sensors, used front buzzer, used 8 channel controller and new cabling from Kufatec.

I also bought a kit of tools for cleanly punching holes in the bumper, most if not all VW Group cars bumpers will have a X moulded into the inner surface - so that you can "place" the centre of the holes accurately.

Edit:- I see that Kufatec do not offer a kit to upgrade a rear only system to a front and rear system, which seems strange?