Page 1 of 1
wheel offset on ats cups i'm buying?
Posted: Fri Apr 18, 2003 2:47 pm
by nick euro
i have been offered some 2month old ATS cups for £150but the offset is et33.
i have rolled and flared my arches. so will they catch or not.
Posted: Fri Apr 18, 2003 7:32 pm
by polo2k
15`s? width? nd what tyre will you be putting on? oh and make sure the centre hole is the right size cos otherwise you will need centering rings
Posted: Wed Apr 23, 2003 4:35 pm
by nick euro
they are 14x6 and the tyres will be 195/45s i will probably be getting the plastic caps for them too.
Posted: Wed Apr 23, 2003 5:02 pm
by polo2k
a 195 on a 6 inch rim will bulge a little as 195mm is more than 6"
as for the hole thing i ment on the back of the wheel (the surface that goes to the disc/drum) the hole sizes vary
Posted: Wed Apr 30, 2003 8:21 pm
by hardhitter
14"x 6 et 33 should be fine with 195-45's.