[phpBB Debug] PHP Warning: in file [ROOT]/ext/cleantalk/antispam/model/CleantalkSFW.php on line 184: Undefined array key 1
UK-POLOS.NET - THE VW Polo Forum • HELP front wipers and washers not working 64 reg
Page 1 of 2

HELP front wipers and washers not working 64 reg

Posted: Thu Jan 11, 2018 8:52 pm
by sukhbinder
Hi guys

Have a 64 reg new shape 1.4tdi se polo and having some issues. My front wipers are not working nor are my washers.

Fuse 23 was blown which I’ve since replaced but still not working. New fuse not blown either so really confused.

Am I missing something?

Any ideas on what I should do?

Thanks
Steve

Re: HELP front wipers and washers not working 64 reg

Posted: Thu Jan 11, 2018 9:52 pm
by sukhbinder
Update.

When I put old broken fuse in, front wipers work when I press down front washers. Wipers don’t work normally though.

Washers don’t work or make any noise.

I’m stuck! 🤔🙁

Re: HELP front wipers and washers not working 64 reg

Posted: Fri Jan 12, 2018 11:16 am
by joe6
Put the new fuse back in and try disconnecting and reconnecting the battery as this some times resets the system.

Re: HELP front wipers and washers not working 64 reg

Posted: Fri Jan 12, 2018 11:23 am
by gaza1994
chances are, your car's computer still remembers a fault with itself.

So with the new fuse in, try clearing any faults and it should work :)

Re: HELP front wipers and washers not working 64 reg

Posted: Fri Jan 12, 2018 1:03 pm
by iichel
check fuse 8 in the E box in engine bay.

Re: HELP front wipers and washers not working 64 reg

Posted: Sat Jan 13, 2018 8:53 pm
by sukhbinder
Thanks guys. Checked fuse 8 as well in the engine and seems fine so doesn’t look like that.

I’m on the move this weekend and don’t have tools to safely disconnect battery. Is there any way we can reset fault codes without disconnecting battery?

Thanks in advance

Re: HELP front wipers and washers not working 64 reg

Posted: Sat Jan 13, 2018 9:08 pm
by gaza1994
sukhbinder wrote: Sat Jan 13, 2018 8:53 pm Thanks guys. Checked fuse 8 as well in the engine and seems fine so doesn’t look like that.

I’m on the move this weekend and don’t have tools to safely disconnect battery. Is there any way we can reset fault codes without disconnecting battery?

Thanks in advance
VagCom can clear it, not sure if a obd2 reader would pick it up

Re: HELP front wipers and washers not working 64 reg

Posted: Thu Dec 08, 2022 9:58 am
by Pritesh222
Hi mate did you get to the bottom of this. . I have a problem with my wipers. The front are not working , whilst the back one is.

Re: HELP front wipers and washers not working 64 reg

Posted: Thu Dec 08, 2022 10:08 am
by iichel
check your fuses please

Re: HELP front wipers and washers not working 64 reg

Posted: Thu Dec 08, 2022 3:53 pm
by Pritesh222
Checked fuses can not see to work out what exact fuse itis.

Does a blown fuse cause this kind of issue?

Re: HELP front wipers and washers not working 64 reg

Posted: Thu Dec 08, 2022 4:13 pm
by 2fast4ya
Have you done a voltage check?
Check the wiper adapters for voltage you might have a short ,

Re: HELP front wipers and washers not working 64 reg

Posted: Thu Dec 08, 2022 4:16 pm
by Pritesh222
Hi, I have not been able to do a voltage check.

Its very bizaare i was trying to use the washer in the morning when it was completely icy .

Re: HELP front wipers and washers not working 64 reg

Posted: Thu Dec 08, 2022 4:18 pm
by 2fast4ya
May have strained the motor ?
Damp in the electrical connector on wiper motor possibly?

Re: HELP front wipers and washers not working 64 reg

Posted: Thu Dec 08, 2022 4:32 pm
by iichel
Pritesh222 wrote: Thu Dec 08, 2022 3:53 pm Checked fuses can not see to work out what exact fuse itis.

Does a blown fuse cause this kind of issue?
Yes it can be a blown fuse but Polo 6C wiper stalks are also known to fail prematurely.

Re: HELP front wipers and washers not working 64 reg

Posted: Thu Dec 08, 2022 4:34 pm
by Pritesh222
I think I need reassurance that the fuses are okay before going down the motor root. Im thinking if its the stalk why is the back wiper still working..