Led turn signal bulbs
Posted: Thu Mar 29, 2018 9:35 pm
Hello,
My car has hyper flashing with led amber bulbs. Is there anybody know how to fix it?
My car has hyper flashing with led amber bulbs. Is there anybody know how to fix it?
Probably the Worlds greatest Polo resource
https://www.uk-polos.net/
I think that you are meaning when you replaced “fixed” bulbs like side lights and rear lights, @iichel I think is meaning that when you alter the load on an indicator relay, the flashing frequency changes and it is meant to alert you to a bulb failure?peter_dk25 wrote: Fri Mar 30, 2018 7:27 am I had the same problem in my Blue GT 2014 changing to LED Bulbs.
Some coding in 09, Byte 18 solved the problem. You have to try different HEX's..... 73 worked in my car but it depends on what other lamps/bulbs you have installed.
RUM4MO wrote: Fri Mar 30, 2018 4:19 pmI think that you are meaning when you replaced “fixed” bulbs like side lights and rear lights, @iichel I think is meaning that when you alter the load on an indicator relay, the flashing frequency changes and it is meant to alert you to a bulb failure?peter_dk25 wrote: Fri Mar 30, 2018 7:27 am I had the same problem in my Blue GT 2014 changing to LED Bulbs.
Some coding in 09, Byte 18 solved the problem. You have to try different HEX's..... 73 worked in my car but it depends on what other lamps/bulbs you have installed.
No - I mean what I wrote: I have the U-tube front lamps and complete LED taillights installed including the turn signals- so it's not only the fixed bulbs - my friend. Read more carefully...
At least on the 6C I think that you can set some channels to “LED” - maybe not on 6R, though no doubt newer cars will come with all LED indicator bulbs and bulb failure warning system, so newer indicator “relays” will become load independent?
I think my S4 has LED rear indicator bulb and filament front indicator bulb, and that is from factory.