Page 1 of 1

Sump capacity

Posted: Thu May 24, 2018 6:41 pm
by rock.throb
Hi guys, simple question (i hope)
Need to do an oil change on my 1.4 s (75bhp), anyone know the best grade of oil to use, some places say synthetic, some say semi and some say mineral.
Also, what's the sump capacity? Do I need a gallon or just a couple of litres?

Thanks in advance

Re: Sump capacity

Posted: Fri May 25, 2018 12:31 pm
by alexperkins
10W40 semi synthetic

Normally around 3.25-3.75 litres depending on the amount stuck in the oil filter

Fill to three, fill to full on the dip stick, run for 5 mins, turn engine off, wait 5 mins and check level again and top up

Re: Sump capacity

Posted: Fri Feb 08, 2019 12:29 pm
by Feeblington
I use 5w40. Engine code aua 1.4 16vv 75hp 3.3L ishh