UK-POLOS.NET - THE VW Polo Forum

Hi guys, I own a Vento that does not come standard with side folding mirrors .
Thinking of retrofitting into my car, has anybody done it before?
I have bought the new mirror with folding (8 pins) and the new folding switch .
My door module part number is 6R0 959 802 AL ( driver side), 6R0 959 801 AH (passenger side).

So far I have connected a wire to my folding switch(pin8) to WRM (pin 12) , and the other 2 wires to t16g/14 and t16g/15.

However, nothing happens when I twist the switch. Tried recording my module to 010002, 0100B3, 0100B1 but code rejected.

It's highly likely that the software (SW 5xxx or 5540) of your window regulator motor - door module - doesn't support the folding mirror function.
What's the model year of your Vento? (letter, tenth digit of the VIN)

ciclo wrote:It's highly likely that the software (SW 5xxx or 5540) of your window regulator motor - door module - doesn't support the folding mirror function.
What's the model year of your Vento? (letter, tenth digit of the VIN)

Hi Ciclo, the 10th digit of my car is F. My car is manufactured in 2015


Sent from my iPhone using Tapatalk

I'm afraid your WRMs don't support the mirror fold function.

Read the govindsharma's topic.

----
edit
4R3 comfort function .... for windows.

ciclo wrote:

I'm afraid your WRMs don't support the mirror fold function.

Read the govindsharma's topic.

----
edit
4R3 comfort function .... for windows.

I see. So which version of regulator should I get? Any specific PR codes?


Sent from my iPhone using Tapatalk

*Update*
Took the door module from a beetle, plugged into my car, mirror folds without any additional coding.

But the window does not roll all the way up as beetle has a frameless door.

Looks like I'll have to find a door module thats for polo or vento





Sent from my iPhone using Tapatalk

At least we now know your wiring is all OK!

Beetle Bluemotion.

2013?

Alvin1001 wrote: Sat Jul 28, 2018 11:50 am Looks like I'll have to find a door module thats for polo or vento

Read govindsharma thread.

ciclo wrote:Beetle Bluemotion.

2013?

Alvin1001 wrote: Sat Jul 28, 2018 11:50 am Looks like I'll have to find a door module thats for polo or vento

Read govindsharma thread.

It's a 2012 beetle 2.0 with standard folding mirrors
Sure. Will do
Thanks Ciclo


Sent from my iPhone using Tapatalk

Hi,

Could you please give more explanation about the cabling done. I have a Polo i got the mirrors and everything however the switch to fold doesnt work and only the passenger side mirror fold. Please help with the driver side cabling needed.

ciclo wrote: Sat Jul 28, 2018 5:47 am

what is this program ?

renato_zg_ wrote: Thu Apr 23, 2020 5:12 am

ciclo wrote: Sat Jul 28, 2018 5:47 am

what is this program ?

Ifinterface.com

ciclo wrote:

I'm afraid your WRMs don't support the mirror fold function.

Read the govindsharma's topic.

----
edit
4R3 comfort function .... for windows.

Hey ciclo I wonder if you can help me I reteo fitted folding mirrors following your guide the mirrors successfully fold on the mirror switch but not with locking and unlocking the car

Sent from my SM-G955F using Tapatalk

Byte02 Bit1 enabled, both WRMs.

Redo the comfort function with the window switches, in both doors/windows.


https://www.uk-polos.net/viewtopic.php? ... 30#p481352

ciclo wrote:Byte02 Bit1 enabled, both WRMs.

Redo the comfort function with the window switches, in both doors/windows.


https://www.uk-polos.net/viewtopic.php? ... 30#p481352

I have changed the coding on both WRM's to enable byte02 and bit1 with no success of folding the mirrors when locking and unlocking

Sent from my SM-G955F using Tapatalk