Page 1 of 1
Replacing steering wheel - plug and play(ride)?
Posted: Mon Jan 07, 2019 12:01 pm
by maxym
Hi. I own Polo 6R from 2009. Highline version with factory installed MFSW just like the one on this
picture. I'm thinking about replacing it with the one from Golf VI
R20 or
GTI. Will any of them fit into my car without any further modifications(replacing BCM etc)?
Re: Replacing steering wheel - plug and play(ride)?
Posted: Thu Jan 10, 2019 6:03 am
by ciclo
Both will fit without replacing the BCM.
For everything to work properly you need an IC with MFD+ (take a look in the forum sales section) and the wiper stalks without trip computer buttons.
Re: Replacing steering wheel - plug and play(ride)?
Posted: Thu Jan 10, 2019 1:23 pm
by maxym
ciclo wrote: Thu Jan 10, 2019 6:03 am
Both will fit without replacing the BCM.
For everything to work properly you need an IC with MFD+ (take a look in the forum sales section) and the wiper stalks without trip computer buttons.
Thanks for reply
Can I use mentioned MFSW with standard stalks? Or it will cause errors? I have in plans also retrofiting CC so i will change the stalks later on
Re: Replacing steering wheel - plug and play(ride)?
Posted: Thu Jan 10, 2019 5:49 pm
by ciclo