BCM nearly inaccessible
Posted: Fri Oct 11, 2019 10:25 am
Hello everyone!
I’m currently in the process of retrofitting cruise control using a new stalk and a wire set I bought online.
After routing the cables from my steering wheel to the foot well area, I’m required to assign the correct pins to the white connector on the BCM, however the loom is super tight and won’t budge even a little. I can’t see anything up there.
Has anyone messed with it and can provide tips on what to do in this case? My Polo is a 2011 6R.
Thanks.
I’m currently in the process of retrofitting cruise control using a new stalk and a wire set I bought online.
After routing the cables from my steering wheel to the foot well area, I’m required to assign the correct pins to the white connector on the BCM, however the loom is super tight and won’t budge even a little. I can’t see anything up there.
Has anyone messed with it and can provide tips on what to do in this case? My Polo is a 2011 6R.
Thanks.