6r tmps vcds help needed
Posted: Sun Dec 22, 2019 3:35 pm
Hi all.
Just trying to help a friend out so any info is greatly appreciated.
He's brought a 6r that has been involed in an accident. He runs a garage and will be using this as his daily to run to and back from work In. Everything else has been repaired (front end damage)
His issue is the tpms system. It always says pressure loss and cannot be reset so he wants in turning off completely. I can get into 17 instruments on vcds and turn the tpms off. Cannot get into 03 abs to remove tpms. It had 65 tpms turned on within the gateway installation list but cannot access module so I've removed it from the gateway list.
If you hover over the login for abs it shows code 40168 (if I remember correctly) which gets accepted. When you go to 07 coding and long coding helper, it just shows the bytes but no info as to what each one does.
Can anyone help? Is there any other modules which need tpms coding removed apart from 03 abs and 17 instruments?
Joe
Just trying to help a friend out so any info is greatly appreciated.
He's brought a 6r that has been involed in an accident. He runs a garage and will be using this as his daily to run to and back from work In. Everything else has been repaired (front end damage)
His issue is the tpms system. It always says pressure loss and cannot be reset so he wants in turning off completely. I can get into 17 instruments on vcds and turn the tpms off. Cannot get into 03 abs to remove tpms. It had 65 tpms turned on within the gateway installation list but cannot access module so I've removed it from the gateway list.
If you hover over the login for abs it shows code 40168 (if I remember correctly) which gets accepted. When you go to 07 coding and long coding helper, it just shows the bytes but no info as to what each one does.
Can anyone help? Is there any other modules which need tpms coding removed apart from 03 abs and 17 instruments?
Joe