Is it simple to change the HT leads on a 2000 X-reg 1.0l ??
Posted: Thu Sep 02, 2004 9:18 pm
Ello folks,
had a quick scan through the search pages nd not turned up much.
Basically, i want to change the leads on the wife's 1.0 x-reg polo as its stuttering under load ( pointing directly the original fitment HT leads )
But, me being me, i want to fit better than normal set. I have on one of my V8's a set of 8mm Magnecors and on the other V8 a set of 8mm Mallory ones . . . . similar setup to this:
but
when i look at the current leads on the engine, they seem to be totally different tops that attach to the spark plugs ( or at least the look different from what i am used ).
Do the leads just unclip like normal ones ? and can i just fit another set in its place?
I didn't want to pull a lead off to find i'd bust something.
thanks, Donald
had a quick scan through the search pages nd not turned up much.
Basically, i want to change the leads on the wife's 1.0 x-reg polo as its stuttering under load ( pointing directly the original fitment HT leads )
But, me being me, i want to fit better than normal set. I have on one of my V8's a set of 8mm Magnecors and on the other V8 a set of 8mm Mallory ones . . . . similar setup to this:
but
when i look at the current leads on the engine, they seem to be totally different tops that attach to the spark plugs ( or at least the look different from what i am used ).
Do the leads just unclip like normal ones ? and can i just fit another set in its place?
I didn't want to pull a lead off to find i'd bust something.
thanks, Donald