UK-POLOS.NET - THE VW Polo Forum

Posted: **Tue Sep 07, 2004 9:57 pm**

Is this correct for the 9n?

PCD OF 5 X 100 MM WITH AN OFF SET OF 38MM

Posted: **Wed Sep 08, 2004 6:29 am**

Yes. Is the centre bore ok? Should be 57 mm.

Posted: **Thu Sep 09, 2004 1:15 am**

Doesn't the offset/ET vary slightly depending on the size/width of the wheel?

Posted: **Thu Sep 09, 2004 1:07 pm**

yes. with 15/16 u can have offsets like 17mm etc..

while with 17s ull not get far from 30mm

9n wheel pcd question