Check oil level warning not switching off after adding oil
Posted: Wed Jun 30, 2021 12:40 pm
It’s almost a year since my daughters Polo was serviced at the main dealer and the next service we want to delay a few months to coincide with the MoT.
The Check Oil Level light appeared. The oil was at the bottom of the dipstick so I added a litre of oil and the reading is now at the upper level of the dipstick. However the check oil level light won’t go off.
I read a few stories on Google about the bonnet catch wiring. Upon checking I noticed that the dash shows any door that is open including the hatch door. However it does not register the bonnet being open so I’m assuming that this may indeed point to the bonnet catch wiring issue?
Is there a quick fix to test this or a work around? I think I can see two brown wires that run from the water bottle area on the left .. along towards to the bonnet catch, are these the offending wires? If so is it possible to snip these and join them together to trick the car into thinking the bonnet has been opened and closed? I don’t really want to remove the front grill etc to get at the bonnet catch wires unless there is no way around it.
Any advice appreciated.
The Check Oil Level light appeared. The oil was at the bottom of the dipstick so I added a litre of oil and the reading is now at the upper level of the dipstick. However the check oil level light won’t go off.
I read a few stories on Google about the bonnet catch wiring. Upon checking I noticed that the dash shows any door that is open including the hatch door. However it does not register the bonnet being open so I’m assuming that this may indeed point to the bonnet catch wiring issue?
Is there a quick fix to test this or a work around? I think I can see two brown wires that run from the water bottle area on the left .. along towards to the bonnet catch, are these the offending wires? If so is it possible to snip these and join them together to trick the car into thinking the bonnet has been opened and closed? I don’t really want to remove the front grill etc to get at the bonnet catch wires unless there is no way around it.
Any advice appreciated.