Armrest Height Adjuster

Chat about your 6R/6C model Polos here!
Post Reply
User avatar
J+silva
Bronze Member
Posts: 109
Joined: Fri Aug 09, 2019 5:53 pm
Drives: polo conf.
Location: Lisboa

Armrest Height Adjuster

Post by J+silva »

Hi,can you tell me if you advise or not and where to buy a arm rest height adjuster,I took a trip on the highway and my arm was tired due to lack of support,thanks.
User avatar
mirceaculita
Silver Member
Posts: 271
Joined: Fri Aug 21, 2020 11:25 am
Drives: 6R 1.2TDI 75hp
Location: Romania

Re: Armrest Height Adjuster

Post by mirceaculita »

the oem armrest can be adjusted. You can tilt it up and down.
User avatar
J+silva
Bronze Member
Posts: 109
Joined: Fri Aug 09, 2019 5:53 pm
Drives: polo conf.
Location: Lisboa

Re: Armrest Height Adjuster

Post by J+silva »

mirceaculita wrote: Sun Aug 22, 2021 11:00 am the oem armrest can be adjusted. You can tilt it up and down.
You can adjust but do not allow you to hold the steering wheel and lean your arm ie either hold the steering wheel and keep your arm in the air or rest your arm and hold the steering wheel with just one hand.
User avatar
FFA76
New
Posts: 25
Joined: Tue Jun 05, 2018 2:19 pm
Drives: Polo 6R BlueGT
Location: The Netherlands

Re: Armrest Height Adjuster

Post by FFA76 »

I think your posting this in the wrong forum.
Shouldn't it be the AW forum?
SRGTD
Bling Bling Diamond Member
Posts: 3541
Joined: Sun Oct 11, 2015 9:40 pm
Drives: 2020 AW Polo GTI+, Pure White.
Location: UK

Re: Armrest Height Adjuster

Post by SRGTD »

@J+silva; assuming you did mean to post on the AW Polo forum board, there is a product that can be fitted to the front lip of the storage compartment under the lid of the armrest to raise the height (available in three different heights)

https://www.diversionautomotive.com/pro ... t-adjuster

You may find similar products available cheaper elsewhere if you search on ‘VW Polo AW armrest height adjuster’ or similar search.
User avatar
J+silva
Bronze Member
Posts: 109
Joined: Fri Aug 09, 2019 5:53 pm
Drives: polo conf.
Location: Lisboa

Re: Armrest Height Adjuster

Post by J+silva »

FFA76 wrote: Sun Aug 22, 2021 3:47 pm I think your posting this in the wrong forum.
Shouldn't it be the AW forum?
Sorry to post here my mistake, but I had it done on a 3d printer, it's excellent and it was cheap.
Post Reply