New E10 fuel compatibility 1.0 MPI engine

Chat about your MKV (6N2) Polo
Post Reply
soother
New
Posts: 23
Joined: Wed Sep 30, 2015 8:45 am
Drives: 6N2
Location: Somerset

New E10 fuel compatibility 1.0 MPI engine

Post by soother »

I see that E10 (10% ethanol) petrol will be the new standard, taking over from E5 (5%) from tomorrow here in England.
I have a 6N2 with a 1.0 MPI engine. 6N2's seem to be too old to be on the compatibility lists I have seen. Is it compatible? Or does anyone have experience of using this fuel in these cars? Are there any problems?
I know this 10% ethanol fuel has been used in other countries for years, and that some have even higher ethanol content. Any feedback?
Thanks.
Kal_El
New
Posts: 9
Joined: Thu Aug 26, 2021 2:25 am
Drives: Match 1.4 2001
Location: Derby

Re: New E10 fuel compatibility 1.0 MPI engine

Post by Kal_El »

Hi

Enter your reg here and it’ll tell you if it’s compatible or not:

https://www.zemo.org.uk/work-with-us/fu ... hecker.htm
Post Reply