Error: Workshop! Leave Vehicle Only When Selector Lever in P
Posted: Wed Oct 20, 2021 1:44 pm
Anyone with a 6R/C seen this on their DSG?
i had it intermittently shortly after buying the car & a software patch was applied that cured it. Fast forward five years & it's back. Only appears while actually driving & bongs the display maybe half a dozen times times shortly after starting off, together with the warning triangle. Message then clears from the display but triangle remains. All clears when switched off & restarted but starts again when driving. No faults codes logged.
There's a similar thread in the AW Forum but like Googling the symptoms in general, is inconclusive. Some suggestion that there is a TPI for this but also possibly only for the AW.
i had it intermittently shortly after buying the car & a software patch was applied that cured it. Fast forward five years & it's back. Only appears while actually driving & bongs the display maybe half a dozen times times shortly after starting off, together with the warning triangle. Message then clears from the display but triangle remains. All clears when switched off & restarted but starts again when driving. No faults codes logged.
There's a similar thread in the AW Forum but like Googling the symptoms in general, is inconclusive. Some suggestion that there is a TPI for this but also possibly only for the AW.