Help! Missing pipe on exhaust pressure sensor 1.6tdi CAYB
Posted: Sun Dec 12, 2021 10:45 am
Hi! I'm sirazazel from Spain, Mallorca, and I have a 6R polo from 2011 that lately has been having injection problems (I'm currently talking with my Volkswagen dealer to fix this issue once and for all), white smoke and EGR issues. My coil light went flashing two times lately, usually restarting the car fixes it and it drives normal again.
I bought a new exhaust pressure sensor (0 281 006 083) to try if a faulty sensor was giving bad readings hence forcing regen cycles and I was removing the old one when I found something weird... one of the pipes wasn't connected to anything.
These are the schematics I found on the Ross-Tech forum, but I'm a little lost.
Where should it be connected? Can someone send a picture? Thanks in advance!
I bought a new exhaust pressure sensor (0 281 006 083) to try if a faulty sensor was giving bad readings hence forcing regen cycles and I was removing the old one when I found something weird... one of the pipes wasn't connected to anything.
- Captura-11.png (336.82 KiB) Viewed 1709 times
Where should it be connected? Can someone send a picture? Thanks in advance!