Cluster swap from non mfd to red mfd

Chat about your 9n Polo (inc GT and Fun)
Post Reply
Gst_Rider9N
New
Posts: 1
Joined: Mon Feb 21, 2022 10:14 pm
Drives: 2003 9N 2.0 8V Bbx
Location: Brazil

Cluster swap from non mfd to red mfd

Post by Gst_Rider9N »

Hi there! I've swapped a non mfd cluster with a red mfd cluster. The thing is, the old mfd cluster had a board computer under the speedo gauge, and have a wiper stalk, that changes the infomation. After the swap, the stalk is useless, I can't change the information on mfd. The cluster is working fine, the immo has been adapted in the new cluster. The question is... I have to program the new cluster with mfd to stalk work? By the way... here's the info about car and clusters...

Polo 9N 2003 2.0L Brazil Model
Original cluster 6Q0920820Q VDO V05
New (used) cluster 6Q0920826K VDO V04
Attachments
New cluster
New cluster
D69BAD15-7235-46F3-98DC-672E5D6E4264.jpeg (1.64 MiB) Viewed 628 times
Original cluster
Original cluster
95C26273-9011-48F7-AA1A-F578FA1569D3.jpeg (1.32 MiB) Viewed 628 times
New cluster
New cluster
37E6F124-3499-474B-8149-4D0E0C970694.jpeg (798.67 KiB) Viewed 628 times
Original cluster
Original cluster
B8EB2DB8-39DC-411F-A47D-7474D5E42879.jpeg (2.53 MiB) Viewed 628 times
Post Reply