Coilovers + springs

Chat about your 6R/6C model Polos here!
Post Reply
Chas
New
Posts: 1
Joined: Sat Dec 03, 2022 11:52 pm
Drives: 6r polo
Location: Gloucestershire

Coilovers + springs

Post by Chas »

Hi there,
this is my first post on here and I am wondering whats the best way to lower my 6r polo some more, I am currently running a set of AP coilovers and want to go lower. Ive already taken out the rear spring perches and left the mount in so it has got some purchase still. I was wondering what people have done to go lower still, I must be sitting at 50-60 mm of lowering on the rear but still have about 2 fingers of arch gap still. Does anyone have a good suggestion for a set of lowering springs that work well, or some good spring rates so that i can order a set of coiled springs off bc racing. If not ill make up some new mounts that sit in the lower control arm that are more squat. See photo for how the car is currently sitting. i have the fronts set to about the same height as the rears but i know they can go a lot lower.
Any recommendations would be great :D
Attachments
DSC_0014.JPG
DSC_0014.JPG (6.71 MiB) Viewed 477 times
Ludwigvonwigbearer
New
Posts: 5
Joined: Mon Nov 28, 2022 4:37 pm
Drives: 2017 1.2 TSi SE Match edition
Location: Nottinghamshire

Re: Coilovers + springs

Post by Ludwigvonwigbearer »

Looks great as is :D
Ludwigvonwigbearer
New
Posts: 5
Joined: Mon Nov 28, 2022 4:37 pm
Drives: 2017 1.2 TSi SE Match edition
Location: Nottinghamshire

Re: Coilovers + springs

Post by Ludwigvonwigbearer »

Looks great as is :D
Post Reply