Removing instrument panel - how?
Posted: Sat Oct 02, 2004 6:11 pm
Does anyone know how to get the instrument panle out.
One of the rattles that my dealer claims doesn't exist can be removed so long as I puch on top of the glass of the instrument binnacle. So I'm thinking of taking the instruments out and packing under the cowl myself.
I've removed the "loose" panel that goes over the top of the steering column and under the bottom of the binnacle's glass and have found a couple of screws about an inch in from each side of the instruments and burried quite deep into the dash. Are these all I have to remove?
Does anyone know how much slack there is on the wiring loom behind the instruments? I don't want to disconnect anything, but am hoping to be able to reach the underside of cowl with the instruments still "wired up" - is this likely?
I'm sure I've seen instructions on how to do this for fitting chrome rings to the Fabia's dials, but can't find these any more -- can anyone offer any advise?
Thanks
Deek.
One of the rattles that my dealer claims doesn't exist can be removed so long as I puch on top of the glass of the instrument binnacle. So I'm thinking of taking the instruments out and packing under the cowl myself.
I've removed the "loose" panel that goes over the top of the steering column and under the bottom of the binnacle's glass and have found a couple of screws about an inch in from each side of the instruments and burried quite deep into the dash. Are these all I have to remove?
Does anyone know how much slack there is on the wiring loom behind the instruments? I don't want to disconnect anything, but am hoping to be able to reach the underside of cowl with the instruments still "wired up" - is this likely?
I'm sure I've seen instructions on how to do this for fitting chrome rings to the Fabia's dials, but can't find these any more -- can anyone offer any advise?
Thanks
Deek.