UK-POLOS.NET - THE VW Polo Forum

As the title says I'm just seeing if it's possible to retrofit an active TPMS system to PQ26 platform vehicles (6C) as from what I understand no PQ26 platform vehicle had it from the factory but the retrofit to PQ25 (6R) is fairly well known.

Any info or ideas?

I'd start with checking if the gateway supports address 65

My gateway has address 65

BCM
6C0 937 089 D
Gateway
6C0 909 901 A
IC - MFD
6C0 920 946 C
Head-unit
MIB2STD2 | 3Q0 035 842 B

I'd probably go with the 5Q0 TPMS unit and see what happens. Wiring is easy.

I'm assuming you're referring to 5Q0 907 273 B antenna/module and 5Q0 907 275 B pressure sensors?

Please Bepis, read it https://www.drive2.ru/l/616081105128261542/
The Goofle translator works quite well for both English and Spanish.

The PQ26 platform was something radical and I think something unexpected.

Seems it may not be possible on PQ26

Due to the constant presence of an error regarding the absence of a message in block 65, a verdict was made - there is no support for the RDKS protocol in the BCM blocks/gateways of the PQ26 platform

ciclo wrote: Mon Jun 24, 2024 4:21 pm Please Bepis, read it https://www.drive2.ru/l/616081105128261542/
The Goofle translator works quite well for both English and Spanish.

The PQ26 platform was something radical and I think something unexpected.

Excellent thread. Thanks for the link Fernando.

Bepis wrote: Mon Jun 24, 2024 8:53 pm Seems it may not be possible on PQ26

Due to the constant presence of an error regarding the absence of a message in block 65, a verdict was made - there is no support for the RDKS protocol in the BCM blocks/gateways of the PQ26 platform

Yeah. I know that you in particular would appreciate the information about the active TPMS on your MFD.
I feel sorry for you, accompany you in disappointment.

---

@giannis20vt, yes, it's an excellent job.