Seat trim cover
Posted: Sat Aug 31, 2024 1:26 pm
Hello fox !
For those of you who can, I'd like to ask you a favour.
I was replacing the front seat lower cover on my 6C because of scratches, dent and other asthetics damages made by the first and previous owner.
No problem for the driver's part, but the passenger's part has a different fixing.
As you can see here on the top right of each part:
New part:
Original part removed from my car
Originally there was a nipple that fitted into the side cover and an original rilssan:
On the new part, nothing, just a hole and apparently it's a rivet (which I have but which doesn't fit) that needs to be fitted.
If you could take a photo of this area for me to see, that would be great.
Thanks and have a good weekend!
For those of you who can, I'd like to ask you a favour.
I was replacing the front seat lower cover on my 6C because of scratches, dent and other asthetics damages made by the first and previous owner.
No problem for the driver's part, but the passenger's part has a different fixing.
As you can see here on the top right of each part:
New part:
- PXL_20240822_134734352.jpg (2.35 MiB) Viewed 1318 times
- PXL_20240822_134727623.jpg (2.26 MiB) Viewed 1318 times
- PXL_20240822_091931151.jpg (2.56 MiB) Viewed 1318 times
On the new part, nothing, just a hole and apparently it's a rivet (which I have but which doesn't fit) that needs to be fitted.
If you could take a photo of this area for me to see, that would be great.
Thanks and have a good weekend!