6C Fuel Pump mice / Looking for fuel plug photo
Posted: Sun Nov 24, 2024 11:58 am
Hey UKPolos, Found some mice that have kindly been living above my fuel pump which is why my gauge would sometimes intermittently stop and start (usually for a minute or so)
Someone that works for my Dad's garage put a new fuel plug on for me but I'm still getting a fuel pump gauge error (the garage isn't a specialist and doesn't do wiring by trade)
The pump works and I can drive but I have no gauge (have to reset the mile counter and fill it to the brim around 350 - 400 miles)
I tried to clear the fault in VCDS but its still showing an error "Resistance too high"
https://i.imgur.com/1hdGqdY.jpeg
New Plug
https://i.imgur.com/2pHsYVw.jpeg
https://i.imgur.com/9HEB4qU.jpeg
If anyone else with a 6C is able to send me a photo of their fuel plug so I can check the data wires are correctly connected I would be very grateful
If anyone has any suggestions as to what the fix / issue could be, I would be very grateful
My dad said they tried another fuel pump itself from the scrap yard which had the same issue
Someone that works for my Dad's garage put a new fuel plug on for me but I'm still getting a fuel pump gauge error (the garage isn't a specialist and doesn't do wiring by trade)
The pump works and I can drive but I have no gauge (have to reset the mile counter and fill it to the brim around 350 - 400 miles)
I tried to clear the fault in VCDS but its still showing an error "Resistance too high"
Code: Select all
Address 17: Instruments (J285) Labels:| 5G0-920-XXX-17.clb-SRI3
Part No SW: 6C0 920 930 HW: 6C0 920 930
Component: KOMBI 110 0260
Coding: 2735090021002600010838000000000000000000
Shop #: WSC 31414 790 50316
ASAM Dataset: EV_DashBoardVDDMQBAB 009036
ROD: EV_DashBoardVDDMQBAB_009_VW26.rod
VCID: 60CF16817B43A44AB5-8034
2 Faults Found:
1048578 - No Basic Setting
B2010 00 [009] - -
[New feature! Extended UDS fault detail is only supported by current gen. interfaces]
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 133
Mileage: 155335 km
Date: 2024.09.16
Time: 15:13:24
9453074 - Fuel Level Sensor 1
B103E 1B [009] - Resistance Too High
Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Reset counter: 133
Mileage: 155335 km
Date: 2024.09.16
Time: 15:13:24https://i.imgur.com/1hdGqdY.jpeg
New Plug
https://i.imgur.com/2pHsYVw.jpeg
https://i.imgur.com/9HEB4qU.jpeg
If anyone else with a 6C is able to send me a photo of their fuel plug so I can check the data wires are correctly connected I would be very grateful
If anyone has any suggestions as to what the fix / issue could be, I would be very grateful
My dad said they tried another fuel pump itself from the scrap yard which had the same issue
