Page 1 of 1

Location of Blend air flap!

Posted: Tue Mar 11, 2025 3:01 pm
by Konc13
Hello, anyone knows where I can locate the blend air flap in the Polo 9n 2003? I want to replace it and I don’t know where it’s located!

Re: Location of Blend air flap!

Posted: Tue Mar 11, 2025 7:22 pm
by Maarten
You mean warm and cold air mixer?
Center low behind the centerconsole, not easy to reach.

Re: Location of Blend air flap!

Posted: Tue Mar 11, 2025 7:24 pm
by Konc13
Accessible from passengers side if glovebox is out?

Re: Location of Blend air flap!

Posted: Wed Mar 12, 2025 9:09 am
by Maarten
No that is the fresh air flap
The cold and warm mix flap is located near the footwell in the center

Re: Location of Blend air flap!

Posted: Wed Mar 12, 2025 9:13 am
by Konc13
So for the hot and cold air mix I need the V68 motor? That is located in the evaporation somewhere in the middle?

Re: Location of Blend air flap!

Posted: Wed Mar 12, 2025 9:14 am
by Maarten
It is located inside nr 37
Nr 6 is the actuator
HVAC polo 2003.jpg
HVAC polo 2003.jpg (107.81 KiB) Viewed 23518 times

Re: Location of Blend air flap!

Posted: Wed Mar 12, 2025 9:18 am
by Maarten
Nr 31 is for recirculation (the fresh air flap)
HVAC polo 2003 .jpg
HVAC polo 2003 .jpg (75.32 KiB) Viewed 23511 times

Re: Location of Blend air flap!

Posted: Wed Mar 12, 2025 9:21 am
by Konc13
The thing that I want isn’t the motor? (Nr27)? With part number 6Q0 907 511.

Re: Location of Blend air flap!

Posted: Wed Mar 12, 2025 9:22 am
by Maarten
Konc13 wrote: Wed Mar 12, 2025 9:13 am So for the hot and cold air mix I need the V68 motor? That is located in the evaporation somewhere in the middle?
The V68 is the one that regulates the temperature mix indeed

Re: Location of Blend air flap!

Posted: Wed Mar 12, 2025 9:23 am
by Maarten
Konc13 wrote: Wed Mar 12, 2025 9:21 am The thing that I want isn’t the motor? (Nr27)? With part number 6Q0 907 511.
Yes it is

Re: Location of Blend air flap!

Posted: Wed Mar 12, 2025 9:41 am
by Konc13
Do you think the steps of this thread are the correct ones to replace the motor?
viewtopic.php?t=52145

Re: Location of Blend air flap!

Posted: Wed Mar 12, 2025 5:59 pm
by Maarten
Looks like it yeah