UK-POLOS.NET - THE VW Polo Forum

Hi, I am trying to adapt some new keys to my 6N2, I am having trouble getting the IMMO SKC and have been trying to use Me7_95040 but keep getting a fail code. Is there anyone who has had some success in doing this SKC retrieve or any recommended software to use. I have VCDS Lite for the adaptation once I can login to the Immobiliser with the correct SKC.

Ver: 1.31
Com Port: 4
Baud Rate: 10400
Opening COM4 ... OK
Initiating communication ... OK
ECU ID response: 036906033A
1.6l/4V SIMO
S3 00HS3148
SoftCod: 00031, WSC: 00788
Reading EEPROM .FAIL. (error=0xEF01)
Closing COM4