Help to retrofit MFSW in my 6R POLO
Posted: Fri Oct 16, 2026 2:43 pm
Hi everyone,
I'm new here, so sorry if I'm posting in the wrong place.
After a few ups and downs, I've just got my Polo back from the garage after an engine replacement. I really love this car (it was a gift from my father). Rather than replacing it (I unfortunately had to seriously consider that question when it broke down), now that I've got it back with a new engine, I'd like to make the interior a bit more comfortable. It's only a "Trendline mixed with a Comfortline" (it's impossible to know the exact trim level, and some sites say Trendline while others say Comfortline). Anyway, the plastic steering wheel is crumbling with age, and I was wondering whether it might be worth trying an MFSW while I'm at it.
So I've had a look around the forum, but I haven't reached a definite conclusion.
I understood that I need to remove the airbag to be sure of the number of pins.
What I do know, following a VCDS scan, is that my versions are as follows:
Address 15: Airbags (J234) Labels:* Redir Fail!
Part No SW: 6R0 959 655 K HW: 6R0 959 655 K
Component: VW10Airbag01K H09 0020
Address 09: Cent. Elect. (J519) Labels:. 6R0-937-08x-09.clb
Part No SW: 6R0 937 087 K HW: 6R0 937 087
Component: BCM PQ25 H+4 H46 0251
Address 19: CAN Gateway (J533) Labels:. 6N0-909-901-6R.clb
Part No SW: 6N0 909 901 HW: 6R0 937 087
Component: GW-K-CAN TP20 H46 0251
Did someone already try it with this versions ?
Also, did you have some tips to restore my headliner?
Thanks a lot
I'm new here, so sorry if I'm posting in the wrong place.
After a few ups and downs, I've just got my Polo back from the garage after an engine replacement. I really love this car (it was a gift from my father). Rather than replacing it (I unfortunately had to seriously consider that question when it broke down), now that I've got it back with a new engine, I'd like to make the interior a bit more comfortable. It's only a "Trendline mixed with a Comfortline" (it's impossible to know the exact trim level, and some sites say Trendline while others say Comfortline). Anyway, the plastic steering wheel is crumbling with age, and I was wondering whether it might be worth trying an MFSW while I'm at it.
So I've had a look around the forum, but I haven't reached a definite conclusion.
I understood that I need to remove the airbag to be sure of the number of pins.
What I do know, following a VCDS scan, is that my versions are as follows:
Address 15: Airbags (J234) Labels:* Redir Fail!
Part No SW: 6R0 959 655 K HW: 6R0 959 655 K
Component: VW10Airbag01K H09 0020
Address 09: Cent. Elect. (J519) Labels:. 6R0-937-08x-09.clb
Part No SW: 6R0 937 087 K HW: 6R0 937 087
Component: BCM PQ25 H+4 H46 0251
Address 19: CAN Gateway (J533) Labels:. 6N0-909-901-6R.clb
Part No SW: 6N0 909 901 HW: 6R0 937 087
Component: GW-K-CAN TP20 H46 0251
Did someone already try it with this versions ?
Also, did you have some tips to restore my headliner?
Thanks a lot