UK-POLOS.NET - THE VW Polo Forum

Guys hello, i want to retrofit mfa buttons on my steering wheel.
I already ordered the used mfa buttons along with the module.

Regarding the cable, Ciclo told me once i need the 5K0971584C, but it is too expensive even used.
I can find cheaper the 1K0971584C (for skoda??!) and 5K0971584D which has an extra cable that ends into a cylinder plug..

Am i good to go with those aswell ?

Please define what "too expensive" means to you, so you can get better answers or solutions.

ciclo wrote: Thu Oct 22, 2026 7:41 pm Please define what "too expensive" means to you, so you can get better answers or solutions.

Ciclo friendo, i found one 5K0971584C at a very good price (OEM) eventually that i will be ordering.
But to your question for me too expensive means like 150 euro .

I want to repaint the car bumpers/door/hood etc so imma need more than 500 and i am on a tight spot because i changed the tyres too .
And i want to add the mfa buttons in order to fix my "stuck on bluetooth mode on cluster" by activating the mfa buttons after installing them.
I kinda want to test the waters with it....because it is the only problem left with the car.

After fixing the "intake airloss" by replacing the whole harness , the car feels brand new and i want to re enjoy it after 4 years of torture.
I feel like it is 2013 again when i bought it lol.

You can find that airbag wiring on AliExpress for between 15 and 20 euros.
The D model is a revision of the C model, either one will work for you.
That cylindrical-shaped terminal is essential, that is, the 1K0 model is not compatible.