Page 1 of 1
Where to get a few parts
Posted: Tue Nov 02, 2004 10:43 am
by srbpower
Sorry guys, tell me to **** off if you like
Right need to start fixing the cosmetic bits on our polo, so does any one know of where I can get the following parts. New or of a breaker, don't mind.
I need:
The cover that goes over the rear wiper join, basically the cap that cover the joiner.
A drivers side door pin.
A new arial, as ours is a bit of a state.
Also does anyone have access to the front bottom grill from a 16v front bumper. Ours has be KO'd by a stone at some point in its life
I think thats it..... for now
Si
Re: Where to get a few parts
Posted: Tue Nov 02, 2004 10:53 am
by bstardchild
srbpower wrote:Sorry guys, tell me to **** off if you like
Shan't do that.....
srbpower wrote:Right need to start fixing the cosmetic bits on our polo, so does any one know of where I can get the following parts. New or of a breaker, don't mind.
Martyn @ Vagparts - post at the bottom of the forum for prices
srbpower wrote:The cover that goes over the rear wiper join, basically the cap that cover the joiner.
One on ebay at the moment for 99p or Vagparts again
srbpower wrote:A drivers side door pin.
Vagparts - shouldn't be much cash
srbpower wrote:A new arial, as ours is a bit of a state.
One on Ebay for £1.00 or Vagparts again - have a look at the potential group buy that may well happen soon
srbpower wrote:Also does anyone have access to the front bottom grill from a 16v front bumper. Ours has be KO'd by a stone at some point in its life
Vagparts - he's quoted for those several times
srbpower wrote:I think thats it..... for now
Si
If you have a brouse thro the Vagparts section I think most of the parts you are loking for have been priced before - I don't think anything looked unreasonable price wise - he's quick to despatch and deliver I'd use him over my local dealer/stealer everytime - just cos he actually knows what bits go where
Posted: Tue Nov 02, 2004 11:03 am
by srbpower
Cheers mate, I'll drop them a line.
I wonder if he does trade prices
Cheers
Si
Posted: Tue Nov 02, 2004 1:37 pm
by david burton
which bit of the arial do you need? i have a spare one of the ends
Posted: Tue Nov 02, 2004 2:02 pm
by srbpower
Basically the whole bit that unscrews. The plastic has split on it
How much you after matey?
Si
Posted: Wed Nov 03, 2004 8:50 pm
by david burton
f**k i can't find it now
searched everywhere
sorry
Posted: Thu Nov 04, 2004 7:47 am
by srbpower
No worries mate
Hopefully going to get one of those stubby ones in the group buy
Si