Page 1 of 1

9n 3dr - Rear Speaker Fitting Adaptors

Posted: Wed Jan 05, 2005 2:45 am
by rjt_05
Hey,

I'm going to be dropping 4 Pioneer TS E1796 17cm speakers into my new 3 door 9n (when it arrives), to be run off my old Sony CDX-M630 (for now, eibach springs are more important to me than an amp).

This is to replace the terrible Beta radio that comes as standard.

The front adapters are easy to get hold of but for the rear of a three door I cannot find any fitting adaptors, is this because the 5dr rear fitting adaptors do the trick? or do I need to look in another direction?

Any help is greatly appreciated!

Cheers.

Posted: Wed Jan 05, 2005 11:57 am
by SiDaBa
Topic previously on fitting rear speakers if you hadn't seen it before, i think it kinda covers what you want to know.

http://www.tigerstyle.co.uk/poloforum/v ... php?t=7847

Posted: Wed Jan 05, 2005 2:53 pm
by rjt_05
Thanks for that. It now seems even more complicated! Think I may just part with some cash and get the local car audio shop to do it for me.

Posted: Sun Jan 09, 2005 11:15 am
by SiDaBa
I feel a bit stupid really considering how often this subject comes up and there's never been a positive out come BUT i don't believe it's that hard to do.

I got bored yesterday and started considering replacing speakers in the car. When i got the car i bought the uprated rear speakers for my 3dr polo as i didn't have rear speakers to my disgust. Bought all the bits and got my gf's dad to do it (at the time i was scared of taking cars apart and he's a vw mechanic). Any how i decided to take the pannel off yesterday and this is what i found.

Image

Image

The big black pannel at the time were under £1 each from volkswagen. Dunno if this is still the case though, but all it is is screwed in. And then the speakers screw in to the black pannel!

Obviously you'll need to buy speaker grilles to replace the dummy one's in the door pannels and you may have to find a way of attaching that square rubber thing around the speaker to an aftermarket one to channel the sound through the grille but i honestly don't think it'd be that hard to fit rear speakers in to a 3dr polo. :)

Posted: Sun Jan 09, 2005 1:04 pm
by carmadaaron
are the adapters different for 5drs compared to 3dr?

Posted: Sun Jan 09, 2005 2:35 pm
by SiDaBa
yeah i would imagine so :wink:

Posted: Sun Jan 09, 2005 10:49 pm
by Polo-03
SiDaBa you didnt happen to get the part number for the black rubber bit that channels the sound?

Posted: Mon Jan 10, 2005 12:56 pm
by SiDaBa
Right don't quote me on these part number but looking on ETKA these should be them (for the 3 door)

The bracket that holds the speakers

Left : - 6Q6 035 243 B
Right : - 6Q6 035 244 B

The rubber parts

Left : - 6Q0 035 217 E
Right : - 6Q0 035 218 E


Please correct me if i'm wrong 8)

Posted: Mon Jan 10, 2005 7:36 pm
by Polo-03
Cheers SiDaBa! Also can you please tell what size of speakers will fit in the rear bracket?

Also for anyone who wants to know the grille part number is

Left (black): 6Q3 868 129 71N
Right (Black): 6Q3 868 150 71N

Posted: Mon Jan 10, 2005 7:50 pm
by SiDaBa
Grille part no. may depend on the colour of your interior :wink: .

Well as far as i can work out it's 17cm measured from the plastic edge that the screws go through, it's what size speaker i'll be buying to replace it. :)

Posted: Mon Jan 10, 2005 7:56 pm
by rjt_05
Excellent, this explains it very well- thank you!

Posted: Thu Apr 13, 2006 1:20 am
by pidge87
Hi guys first post here but iv been around for a wile.
I know this thread is rather old but iv just decided to fit rear speakers in my 9n 3door.
Soooo i was wondering if SiDaba could send me the guide for removing the rear panels.
Also could someone clarify for me which panels i would be ordering from VW as in could u put sum arrows on a pic and upload it? :lol:
Would be greatly appreciated! :)