Vibratechnics Engine Mounts Gropu Buy. All payments made

[9N3 Turbo]

Just had a text mine have been dispatched for delivery via interlink today

Awesome.

[Stargazer]

Same

[rtuk]

turned up just now good job im off work next week will get these fitted then

[blkpolo]

Got my text earlier too mine should be waiting on me when I get in.

anyone able to recover the fitting pics that were in this thread? Or advise how they are fitted?

http://www.uk-polos.net/view ... 43&t=42262

[quinnygti]

Got mine today cheers m8

[rover220]

Look great. hope mine turn up tomorrow then i can fit them at the weekend.

[9N3 Turbo]

Got my text today so also hoping they arrive tomorrow.

Lots to do this weekend on the car.

[rover220]

ive not recieved a text yet.

[gti-joe]

Just a heads up on fitting the dogbone mount guys. I found that the centre bore of the metal insert on the side that goes into the subframe was too small for the VW bolt by about a millimeter. Just a case of drilling it out slightly, think an 11mm drill bit did the trick if I remember correctly.

Unless of course they have changed it to the correct size.

[9N3 Turbo]

Just a heads up on fitting the dogbone mount guys. I found that the centre bore of the metal insert on the side that goes into the subframe was too small for the VW bolt by about a millimeter. Just a case of drilling it out slightly, think an 11mm drill bit did the trick if I remember correctly.

Unless of course they have changed it to the correct size.

Thanks for the heads up on this. Ill provide this feedback to VT and Alex as it would be much better if these fitted without having to modify them.

Have you fitted the others? Any feedback?

[gti-joe]

Yeh I fitted all 3, must be about 7 weeks ago now, as I said at the beginning of this thread, I think it is one of the best investments I made for my Polo.

I was initially worried that it would cause excessive vibration and noise by fitting all 3 but if anything there is less of both. The car just feels altogether better on both a passive and aggresive take off, elimenates all engine movement and all the wee niggly knocking noises I used to have and convinced it helps get the power onto the tarmac alot better.

Wouldnt hesitate to recommend this upgrade to anyone.

[rover220]

any trouble fitting the top two mounts?

[gti-joe]

The gearbox side one was a bit fiddley to get all the holes lined up but got there in the end by lowering and raising the gearbox with the trolley jack a few times until they were all lined up.

[rover220]

The gearbox side one was a bit fiddley to get all the holes lined up but got there in the end by lowering and raising the gearbox with the trolley jack a few times until they were all lined up.

ace. cant wait to get mine fitted after your great review.

[9N3 Turbo]

Now that's a review and a half.
Thanks.