Polo 6R Stalk set Trip Computer

[cabbage_gti]

Thanks alot that would be much appreciated

Its a 2010 Polo TDI

[Eddie-gt]

Thanks alot that would be much appreciated

Its a 2010 Polo TDI

you will need a stalk set that starts with 6Q0

[cabbage_gti]

Really?

Mine is a Polo 6R, seems odd that it would have a 6Q part number?

Anyway assuming I can get hold of the stalk is the installation just the same? 3 wires and coding? Did you say you had the wiring diagram handy?

[Eddie-gt]

Really?

Mine is a Polo 6R, seems odd that it would have a 6Q part number?

Anyway assuming I can get hold of the stalk is the installation just the same? 3 wires and coding? Did you say you had the wiring diagram handy?

6Q0 relates form 2009 - mid 2012
6R0 is for end 2012 - onwards

You can fit the 6R0 but then you need to change the slip ring too

[cabbage_gti]

Really?

Mine is a Polo 6R, seems odd that it would have a 6Q part number?

Anyway assuming I can get hold of the stalk is the installation just the same? 3 wires and coding? Did you say you had the wiring diagram handy?

6Q0 relates form 2009 - mid 2012
6R0 is for end 2012 - onwards

You can fit the 6R0 but then you need to change the slip ring too

What kinda price is the slip ring? That sounds like it should be cheap but you never can tell. I've had a look on fleebay for the 6Q part and can only find the ones WITHOUT the trip computer but there are a few with the 6R0953521A part number. Do you by any chance have the part number of the slip ring? and then I will need the pin outs so I can wire it up

Thanks alot for you help

[Eddie-gt]

Slip ring

Without ESP = 6R0 959 653
With ESP = 6R0 959 654

[greypolo9n3]

Ed ive sent you a pm about my cruise. sorry to knob in on this thread, not sure if its been sent to you

[Eddie-gt]

Ed ive sent you a pm about my cruise. sorry to knob in on this thread, not sure if its been sent to you

replied

[Eddie-gt]

Bump

will also include the 3x wires to make it work and instructions

I fitted a stalk set with cruise

adding the 3x wires and coding = working trip computer controlled by stalk

[Eddie-gt]

bump

[Roundsquare]

Ed I'll take this if it will work with my daughters Polo 6R 2012 and you give me a rough idea on how to fit it before I buy it. Just to see if I will be able to do it or if its destined to end up just sitting in my toolbox for a few years!

From VCDS I have:
Address 17 gives me 6R0 920 960 G

[Roundsquare]

Bump

Sent from my GT-I9305 using Tapatalk

[Eddie-gt]

follow the guide to take the wheel off, and take the stalk off

http://www.uk-polos.net/view ... 10&t=54171

insert 3x wires in the plug and 3x wires in the cluster plug

[Roundsquare]

Sorry I had totally forgot about this.
Cheers Ed, the guide seems easy enough to follow but what plug and what cluster plug?

[Eddie-gt]

Sorry I had totally forgot about this.
Cheers Ed, the guide seems easy enough to follow but what plug and what cluster plug?

you fit 3x wires in the plug on the steering column

The cluster is removed and the plug which plugs into the cluster is where the wires go