UK-POLOS.NET - THE VW Polo Forum

You don't need the rod/mast for the DAB radio to work.

- Check the 5F unit's coding in a few bytes ('DAB installed'). Use VCDS, VCP, ODIS, etc.
- Check the continuity of the DAB cable (black connector) at both ends with a multimeter.

Perform the test in a location where you know there is good DAB ...

Test on the front shock absorber springs:
Double-walled heat shrink tubing with adhesive.
https://i.postimg.cc/0QpgmjqZ/00.jpg
Retraction ratio: 3:1. Diameter used: 15.4 mm. Final wall thickness: 1 mm.
https://i.postimg.cc/sDfFQ3Hs/001.jpg

This is an additional measure to avoid possible noise ...

A few small details to keep in mind when installing new springs on a Golf 7/7.5

From least to most important:

1- Remember that the rubber stop has its housing...
https://i.postimg.cc/rwnqvsLn/1.jpg
... for some, this point doesn't seem entirely clear.

2- A great idea for holding the parts ...

For those who weren't yet familiar with this adaptation:
https://i.postimg.cc/XqGGSSnH/1.png
Recommended only for those whose senses and/or intellect are not yet impaired.


🍹🥤🏄‍♂️🌞
https://www.youtube.com/watch?v=3Znbgqi-0wY&t=79s
( EN: https://www.youtube.com/watch?v=bsdZQub7QVE, FR: https ...

Golf 7.5. DCC Suspension. Fine-tuning for dataset V03935317XE. Spring-to-Dataset Frequency Matching.

As far as I am aware, the dataset V03935317XE belongs to the 'Arteon Elegance, R-line' versions... (without going into infinite variables and technical details).

This is the dataset I ...

It's just a personal opinion, but I think this digital instrument cluster suits the Ibiza a bit better in terms of integration with the dashboard.
Thanks for the contribution!

Glad you think so! Just throwing ideas out.

---
By the way, I always look forward to your posts, your personal stories and experiences are amazing, super clear, and I still learn so much English from you.
You're a great guy!

(Sorry to everyone else for the brief off-topic comment!)

Any recent modifications or repairs (maintenance)?

- Have you changed or modified the taillights in any way?
- Have you installed a reversing camera or an auto-dimming rearview mirror?
- Have you performed any recent maintenance (within the last year) in areas adjacent to the transmission with ...

As RUM4MO already mentioned, the various warning lights on the instrument panel are due to insufficient voltage (electrical supply) precisely when the power steering is drawing a lot of power.
Using a multimeter, check the battery voltage and the condition of the battery connections/terminals. I ...

Since I'll be working on the suspension springs, I'm also going to replace the rear spring plates, and :arrow: take extra measures to prevent squeaking when driving over those lovely sleeping policemen in wet weather.

https://i.postimg.cc/Dy6Kgz9J/rear-spring-plates.jpg


🍹🥤🏄‍♂️🌞
https://www ...

If your OBD2 diagnostic tool is very basic, you probably won't have access to unit coding -BCM, 09 Central Electric-, you'll likely only have access to diagnostics like checking DTCs.
You need something like VCDS, OBD11, VCP, 'etc' -multibrand tools-. Many enthusiasts and workshops have these tools ...

Hi,
Perhaps the problem lies in the BCM coding.
Do you have any diagnostic tools?

---
If it's a 6R (not a 6C), perhaps that POLO had Byte0 Bit0 activated/enabled in the BCM.
In that case, you just need to deactivate/disable it.

Example with VCDS:
https://i.postimg.cc/7Z5D5rBD/6R-BCM-Byte0-Bit0 ...

VCDS Autoscan
Wednesday,24,June,2026,09:08:10:32438
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x64
VCDS Version: 26.3.0.0 (x64) HEX-V2 CB: 0.4701.4
Data version: 20260320 DS375.1
www.Ross-Tech.com


VIN: WVWZZZ6RZDY0CICLO License Plate: AFTER FLASHING STANISLAV 7E0C BCM TO 7E0E ...

Acceptable discrepancies.

To close the loop on the unscheduled tasks:

- Replacement of front shock absorbers, control arms/suspension links, anti-roll bar links/coupling links, and swivel joints.

Images of the front shock absorbers and springs ('Sport', not GTI) of my 6R 1.2 TSI R-line from the factory:
https://i ...