UK-POLOS.NET - THE VW Polo Forum

Golf7.5. Climatronic. How to align the receptacle of a climatronic/aircon/heating flap control motor with the flap actuator arm. https://i.imgur.com/H3woOex.png When installing a flap control motor it is necessary to align the control motor receptacle (1) with the flap actuator arm (2), erWin indic...

Golf 7.5 Geometry. Wheel alignment. https://i.imgur.com/78RfVpp.jpeg After completing 2000km -according to erWin- with the new DCC struts/shock absorbers https://uk-polos.net/viewtopic.php?p=603903#p603903, all the parameters/angles are within tolerances -in green- according to the wheel alignment ...

Golf 7.5 Space-saving emergency-spare wheel + Helix Sound System. Previous info :arrow: https://uk-polos.net/viewtopic.php?p=604474#p604474 https://i.imgur.com/tu4dFzm.jpeg How-to ... Video :arrow: :arrow: :arrow: https://www.youtube.com/embed/r0ZSHdkuNEY?rel=0&autoplay=1 🎧 🔊 🤭 Edit... 🔥 Bonus ...

Edit, updated! 🙏 Side Assist indication, instrument cluster non-3D . MaDwArLoCk IC :arrow: https://a.d-cd.net/PyAAAgCH-uA-1920.jpg , https://www.drive2.ru/l/531400018091835697/ 02DB ... enable bit1 Side Assist indication, instrument cluster 3D. 02F6 ... from 18 to 98 ... enable bit7 Side Assist menu...

Thank you for reporting.
Due to temporary malfunction or poor communication between units/devices, fault codes or warnings are triggered which may even prevent devices from operating normally until the fault code is cleared.

Golf 7.5. New Original 18" wheel. 5Q0601027BT 03C. ...for the spare wheel compartment. https://i.imgur.com/dnyr2UH.jpeg Since I installed the 312mm front brakes I need a 16" or 'higher' spare wheel for the front axle wheels in case I have any issues/incident with the front wheels... or 'm...

Yes, I understand what you mean, factory quality control usually avoids those circumstances.

Protective measures are usually applied.

The distance/gap between electrodes is determined by the spark plug manufacturer and cannot be modified under any circumstances , as this would damage the electrodes. Within the three possibilities for your engine, 04C905606A -in use-, 04C905616D -retired-, 04C905616A -retired-, the distance between...

Golf 7.5 (3Q0) New Start/Stop memory module. Previously (1, image below): https://uk-polos.net/viewtopic.php?p=604231#p604231 , https://uk-polos.net/viewtopic.php?p=604266#p604266 https://i.imgur.com/WDrxRVA.jpeg I have purchased and installed a New Memory Module for the Start-Stop button (2, image...

Patience and Buddhist level meditation to recently get a Chinese electronic module working took me to the Next Level, I am now open to any invention of any provenance...
Thanks for sharing your experience!

Just as a suggestion, clean the original wiring connectors for the new crankshaft and camshaft sensors with residue 0 contact cleaner, and check that the contacts are not displaced from their housing/position in the connectors.

6R vs 6C images:
https://blog.astina.dk/polo-6r-6c-facelift.html

1.2 TSI 6C ... Timing belt.

Being a belt that is 'exposed' (relatively), its durability will be more conditioned by the places of operation (weather, dust, etc.) than by distances or work time. I don't think a lifetime limit can be defined for this belt. Inspecting it will take you the same time as changing it, I would replace...

If you understand the scheme, you already know all the work to be done in the engine area. You will have to make modifications to the original wiring and add the auto-leveling wires to the T14 connectors. https://drive.google.com/file/d/0B2nv91Y7YYCbQklyc19UMVlaeUE/view?usp=sharing&resourcekey=0...

CFWA? https://i.imgur.com/j8rpS2A.jpeg 1- You must make sure that the renewed parts are compatible/correct. Use the original references according to engine code to buy the parts to be renewed, ... original or aftermarket. 2- You must make sure that no old seal is left in the container/hole/duct for ...