UK-POLOS.NET - THE VW Polo Forum

I guess you found it here:
http://www.myturbodiesel.com/wiki/tpms- ... ds-mk6-vw/
But that is for the Golf MK6 with the module 1K0... and that does not automatically mean it will work in 6R too.
It is VERY IMPORTANT to be sure about this. It is dangerous to incorrectly code the ABS module, since it ...

iichel wrote:are you sure that Byte 16 bit 2 is for POLO 6R? This is very important to be sure

I am not sure about it.

Can someone share scan for ABS module Part No SW: 6RF 907 379 A HW: 6R0 907 379 AB and or screenshots of relevant bits ?

As per this link (http://www.myturbodiesel.com/wiki/tpms-activation-reset-and-disable-coding-with-vcds-mk6-vw/) inditect TPMS can be activated in ABS module - byte 16 - bit 2.

However my software is not showing bit descriptions for below module. Instead of description I only see bit 1, 2, etc. So I ...

Hi,

I have come across a few threads on the net talking about TPMS activation through VCDS for older version of VW. I understand it is called indirect TPMS and works with ABS sensors.

Does anyone know how to do it for 2013 polo?

Thanks
Strayion

There is no cc led on my 2013 polo cluster. That is really cheap of vw.
I thought of soldering one but then I came across comments on the net stating the cc light stays on till the cc switch is on and not when the cc is actually engaged.
To fix the issue one needs to reflash (?) the EEPROM with ...

Hi Guys

Finally i was able to install ccs in my polo tdi india with success. It was a very tedious job. Working in the footwell without removing seat compounded the difficulties as it became a physical challenge as well. Now I recommend that the seat should be removed.

Inserting pins in bcm was ...

Update! Issue ressolved


After trying every trick on the net till evening nothing worked for me so started trial and error method.

Here is what worked for me

In central electronics >> adoption. >>> remote adoption

- increased the new value to 1 with the 'up' button - test and save buttons ...

Hi

I upgraded my BCM to 6R0 937 087T today.
Copied previous long code to CAN gateway correctly . Selected right options from the installation list.
Disabled factory mode on BCM. copied long coding all correct.

But now not able to adopt my 2 keyfobs.
I see storage value as 0. Still I started with ...

Hi

I want to upgrade my POLO's BCM (6RU 937 086 D) to a suitable one that supports cruise control.

I see many BCM versions are available online for sale but cant determine whether the new BCM will work or not.

How/where to check higher versions of BCM which are compatible with my car?

E.g. I ...

Hi

I want to upgrade my POLO's BCM (6RU 937 086 D) to a suitable one that supports cruise control.

I see many BCM versions are available online for sale but cant determine whether the new BCM will work or not.

How/where to check higher versions of BCM which are compatible with my car?

E.g. I ...

Still looking...

Hi,

Have sent PM to you.

Wanted a used Body control module 6R0 937 087 for polo

Hi guys,

Sorry for the long delay in getting back. My plans received a big setback when a speeding Duster rammed from behind into my stationary polo :(

https://drive.google.com/file/d/0BwPbWOSonHFPZGJlSFRGZVR3LXM/view?usp=sharing

Repairing may complete next week. Dealing with VW service is ...

It is curious :) that the Elsawin not provide wiring diagrams for DIS in Polo Ind.


ciclo - subscribing to Erwin turned out to be very naive attempt. Without knowing anything I paid up and hoped that there will be a download button to get everything about Polo in a PDF. Instead there was an ...