UK-POLOS.NET - THE VW Polo Forum

Owen - I’ll help you with this on Monday if you can hold fire

The kit you have bought will work with some changes


I also have a 2011 polo 6r and am thinking of doing the same with an Rclick kit or the one from ebay. I would be grateful if you posted instructions on this thread so I can refer ...

iichel wrote: Thu Aug 23, 2018 6:36 pm if you have a picture of your BCM, pins showing, it's easy to tell you.

Here is an image of it: https://i.imgur.com/s7k08Qm.jpg

I upgraded my BCM in my polo 6r from 6R0937085E to 6R0937087R. I know that 087 BCMs support cruise control as shown on Ross-Tech website but I have seen on some forums that some 087 BCMs do not support cruise control? Can someone confirm if my BCM supports cruise control or not as I am going to have ...

iichel wrote: Fri Aug 17, 2018 11:29 pm Valeo and Hella are both OEM for these headlights.

So is it better I cancel the order for the other headlight and buy the Valeo one?

So I needed a new passenger side headlight for my polo 6R. I bought the new OE quality headlamp from eBay (https://www.ebay.co.uk/itm/VW-Polo-6R-2009-On-OE-Quality-Headlamp-Headlight-Cluster-Left-N-S-Passenger-Side/401486768873) because it would arrive quicker than the Valeo headlamp. Currently I ...

iichel wrote: Thu Aug 09, 2018 2:30 pm your new BCM supports remote key locking.
however, you'll probably have to replace your keys. This will probably require learning new keys to the immobiliser.

Is there a guide for this pls?

I suppose so. Most errors were flagged as intermittent and they were not making a lot of sense to me.
If they dont re-appear, it seems like your BCM upgrade was successful.


Thanks very much!

Also, is it hard to fit a wireless key remote system? My polo didn’t come with a wireless unlocking ...

iichel wrote: Thu Aug 09, 2018 11:58 am can you clear all errors and see which ones come back?

Cleared all the fault codes and only HVAC one appears now after rescan. I know my AC system is faulty ... so the BCM replacement went ok?

do you still have an autoscan with the original coding of your 085 BCM? because I have the idea you didn't copy BCM coding and CAN gateway installation list.
I'm suspecting you did a bad BCM swap, but that can be fixed.


I didn’t do an auto scan with my 085 BCM but I took screenshots of the ...

iichel wrote: Wed Aug 08, 2018 9:26 pm Could you describe how you changed the BCM please? step by step?

I used this exact guide
http://www.team-bhp.com/forum/diy-do-yo ... odule.html

I am sure I didn't mess with anything and I backed up original settings.

Just upgraded the BCM from 6R0937085E to 6R0937087R and I did an autoscan on VCDS. I got this:

Wednesday,08,August,2018,21:04:07:39744
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 7 x86
VCDS Version: 16.8.3.1
Data version: 20161010 DS267.0
www.Ross-Tech.com


VIN: WVWZZZ6RZCU015643 ...

So I wanna buy a used BCM off eBay to upgrade my BCM to one that supports cruise control. However, does this mean I have to buy VCDS from Ross-Tech (which is quite expensive)?

Are there no other aftermarket cables? My car is a 2011 VW Polo 1.2 Petrol

Suggestions welcome