UK-POLOS.NET - THE VW Polo Forum

https://i11.servimg.com/u/f11/18/94/39/39/01_3b010.jpg


Reinforcement.png

Hi Fernando. Sorry to bump this old post, but is there any chance you can tell me the part number for the reinforcement frame for the vanity light (shown in the above picture) ? I looked on ETKA, but I couldn't find ...

That is okay as it is really "damage caused by an external event" - but VW Group should try to protect these items from stone damage.


An engine guard (which VW fits in Polos sold in many countries) would have prevented the damage, but VW India only provides it as an insanely priced accessory ...

Thanks for the reply, car is due a service in the next month so I’ll point the garage to it when it’ll be there. Warranty is up until February 2020 so it’ll be before that.


My car was (and still is) under warranty. The reason my warranty claim for the intercooler was rejected was because it was ...

ciclo wrote: Fri Sep 20, 2019 3:15 pm Hi Ganesh, it is not possible, I no longer have the necessary material to manufacture these electrical installations.

I'm sincerely sorry.

Regards.

Hi Fernando. Have you started selling the harnesses again? I'm still interested in buying a set, if so.

I have noticed a few weeks ago that the coolant in the coolant reservoir was sitting below minimum. So I went to the local vw shop and got it inspected. They said there were no visible leaks (looks clean underneath) and that everything’s fine. They topped up the coolant to above max, but today I ...

ag69 wrote: Fri Jun 16, 2017 10:14 am Rear Tow Cover
Key hole protector

Hi,

Could you share the part numbers for these two items please?

Thanks in advance.

Hi Fernando,

Can you sell me one set of harnesses for option B?

Regards,
Ganesh.

benzinkopf wrote: Thu Sep 19, 2019 9:48 am Hi, sure can. As i’m a bit busy now, I’ll PM you soon[emoji1362]


Sent from my iPhone using Tapatalk

Thanks. I will wait to hear from you.

https://uploads.tapatalk-cdn.com/20190824/13bbe6a01cce9dc9c73e5ac32e1df2cf.jpg

Finally, put an extra effort today to finish the long pending mod on all four door including the hatch: The door exit/warning light.


Sent from my iPhone using Tapatalk


Hi,

I would like to install the DEWLs too ...

I promise you that all the information you are looking for is in the following link.

https://uk-polos.net/viewtopic.php?f=10&t=42713&p=466570#p466570


And everyone knows you always keep your promises, Fernando! :D I got all the information I was looking for, and also learnt a lot more that is ...

To all who have the gas strut for lifting the bonnet:
The body shop suggested that the bonnet might have bended slightly due to the use of the gas strut.
I was somewhat lucky to have it replaced after the accident, it was indeed damaged by the front collision.
So have a look at whether this also ...

There is no problem with the voltage when installing LED lights (12-14v). In fact it is better to install LED lights inside.
The necessary wiring depends on the model of the LED lamp you install, there is no specific wiring for the 6R, you must manufacture it or modify the one you bought. It is ...

Yes but yours is a 6c and not a 6r. These are not comparable in terms of their electrics.


Apologies for the confusion. My car is a facelifted 6R sold in India. The 6C was introduced a little later (with features like auto-dimming IRVM, auto-folding ORVMS, etc.) in the same year. So I think I ...

iichel wrote: Mon Sep 16, 2019 3:42 pm For the 6c you'll need to do it via the bcm. Via the fuse box is not an option. Vcds coding is mandatory

But my car doesn't have a BCM Max. It has the BCM High, just like the original poster's car.

Excellent, good job! OEM installation! The best kind of installation.


Hi Michel,

Apologies for bumping up this old thread. I wish to execute this mod in my Polo 6C (2015) with stock BCM, and wanted to know if running DRLs through the fuse box will require any additional VCDS coding.


Since ...