UK-POLOS.NET - THE VW Polo Forum

I change my wire can high & low, so now i've got park assist sound and detection Ok. But no ops on my radio, the menu parking is always not available :( In log with vcds i'ge got many errors, I don't think i've got multiple mount, only 12v and ground are same for park module and rear camera (chi...

iichel wrote: ↑Wed Oct 27, 2021 2:02 pm orange/black is high
orange/brown is low

Thanks !

iichel wrote: ↑Wed Oct 27, 2021 1:42 pm you need to dig further towards the engine

Yes ! i see , but i don't know which cable is high and low, any idea ?

heftyshooly wrote: ↑Wed Oct 27, 2021 9:03 am
......... the other one has the CAN lines (1: CANL, 2: CANH, 3: Terminal 15).

In my picture can you tell me where is can bus H and low under steering wheel .

Thanks !!!!!

Connector A is the one with only 18 positions, that's the one you're missing. It only connects to the front sensors, everything else is in the 26-pin connector. As for accessing the power steering module, you don't need to remove the steering wheel, just twist it 90 degrees so that the flat top ali...

You must connect the PDC module to the powertrain CAN instead. I found it easier to tap the CAN lines from the power steering module, located near the steering column. Hi, are you sure it can't work from quadlock ? Yes. Ok thanks, i'm trying to use can high/low from steering wheel so. And for my pa...

You must connect the PDC module to the powertrain CAN instead. I found it easier to tap the CAN lines from the power steering module, located near the steering column. Hi, are you sure it can't work from quadlock ? The PDC is correctly detected. Because i must remove steering wheel to access can li...

Hi to all, I order to carsystem a 4K rear pdc radar kit (https://www.carsystems.eu/new-vw-polo-6c-park-pilot-rear-w-ops-5q0919283,id1248.html) I install but without success yet, :( i have some interrogation, expect you can help me. :wink: I didn’t receive any instruction for installation and coding,...