UK-POLOS.NET - THE VW Polo Forum

With guidance of Aditya, I have finally fixed the terminal 30 open circuit error by replacing the SB59 fuse. Now all is well again

Hi Michel, thanks for pointing that out. In past I have indeed done this mistake numerous time. Unfortunately it wasn't this time. But it was something on the similar lines. The fuse SB11 had blown up. I replaced it with a new fuse which I had received with the automatic headlights harness. ( Thanks ...

HI Michel,
Thank you for your response. Yes it's connected but I get your drift it might have got short circuited and not reading the key transponder for BCM, I'll try connecting another reading coil and see if that solves the ignition problems.


Thanks & Regards,
Sanket

Last week, I planned to take my car to an authorized VW service center. Since I’m familiar with the VW service process, I removed the CCE and tried to get the horn working.

First, I attempted to reconnect the two cut ends of the LIN-BUS cable while keeping the ignition key in the ON position, but ...

Hi Guys,

I am catching up after a long time. A lot has happened since my last update on this thread.

1) Auto folding ovrm
2) Golf 8 Steering / CCE
3) Upgrade to the front brakes to 288MM on the 17" Skoda Vega alloys & the judder.
4) GTI Interiors
5) TPMS
6) Front seats re-upholstered

And a ...

Thank you so much Ciclo, I was leaning toward the 2Q0 set because they were newer and easily available. But I am unsure of parameterising it correctly & mounting it as it's a path less travelled.

I am indeed closely following your LC project. The level of detail you have gone through testing ...

Hi guys,

I am preparing to retrofit the lane change change assist in my little 6R. Having done some research I have understood that one could go for 3 different options of radars.
1) 7E0
2) 5Q0
3) 2Q0

Feature and accuracy wise is there any difference or advantage of choosing one over the other ...

I finally got the C version of AFS Yesterday.

IMG_20240701_163940.jpg

After installation, I updated the AFS code to the one used & shared by iichel and height adjustment worked right away :D. Thank you iichel 🙏


And a big thanks to Ciclo for guiding me in the right direction 🙏❤️



01-Engine ...

- Now I seem to remember that Govind installed Bixenon headlights on his 6R, not LED headlights, so his experience is of no use to you.

Yes In that case it won't be.


- I insist , the autoscan you must look for must be done with an 'UPDATED' VCDS tool, otherwise we will not be able to know the ...

you can install the same module on passenger side and have 06 memory passenger too :mrgreen: beautiful job


Thank you for your kind words :D. I took inspiration from your Passat seats retrofit and had it on the to-do list. So Big thanks to you for showing us the way 🙏

Is it possible to retrofit ...

Hi Guys,

Finally, I received a whole set of parts for the car for the upcoming upgrades and some of them are already installed. But starting from where I had left off last time.

Previously I had an issue with the interior lights of the master power window switch & Headlamp switch not lighting up ...

This update was pending for last two days, I tried to post twice via mobile but I ended up with an expired session and lost the typed content.



Thanks, Sanket for explaining everything in detail. I got hold of old axel in local market and was contemplating on installing on my car but wanted to ...

Thank you for extending your help, I'll update the thread with the results once I have got the dimmer switch installed.

Regards,
Sanket

Firstly My sincere apologies to Fernando and Mayur. Things going on in my professional life are having very bad impact on my personal life and I was struggling to find time for myself and the car. Thinking & planning about the retrofits to my little polo is the only thing that is keeping me sane ...

Thank you Fernando for chipping in. I'll try these adaptation channels as the first thing in the morning.