UK-POLOS.NET - THE VW Polo Forum

Hi guys, in case anyone in the future is wondering the same question as me the answer is yes it did fit, I imagine all non GTI - petrol - manual polos have the same gearbox and interchangeable drive shafts

Hi guys,

I’ve f****d up my near side drive shaft and need to replace it, I’ve found a drive shaft from a 2007 Polo 9n3 1.2, would this fit my 2007 9n3 1.4? I know this question sounds a bit dumb but I don’t feel like buying a new gearbox

Thanks

Maarten wrote: Wed Sep 20, 2023 10:43 am Nice upgrade, different heater dials also I see
Glad it worked out for you!

Cheers, and yes I’m currently on a mission to modernise the inside of my polo. I’ll post more pictures in the future once I’m done with it

I’ve realised there’s literally no information about this out there so I thought I’d help anyone who's thinking of installing these onto your polo

I bought these exact ones off amazon for £8;
(https://amzn.eu/d/i2HGWXs) and they do not come with any instructions so here is how I did it and what ...

Incase anyone is interested the steering wheel change is super easy and makes the inside look so much better, as long as you disconnect the battery you should have no problems

here’s the before and after

Could it possibly be a failing fuel pump? If its struggling to pressurise your fuel lines that would definitely be a cause as to why its hard to start the engine up

though I’m not fully sure if that would be related to your gauge issue

the connector is the same

you might get an error light for the airbag, the airbag module is known as module 15, that's the digital address of the airbag module


right, cheers

I don’t have a vag com cable, would a simple “clear fault codes” on my obd scanner get rid of the light in case it pops ...

Both 9N3 wheels, should fit.
Just needs a reset of adres 15 probably after fitting.


bear with me sorry,

so I’m assuming the one locking mechanism on the older wheel will work fine without using the other

but what about the extra cable on the older wheel, is leaving it loose not going to give ...

I would like to change my steering wheel that looks like this
IMG_0061.jpeg
IMG_0060.jpeg

for one that looks like this
IMG_0063.jpeg
IMG_0062.jpeg

how possible would this be?

for reference my polo is a 2007 1.4 16V petrol with engine code BUD and the steering wheel I want is from a 2006 1 ...

I have the exact same polo with the exact same problem, I've changed spark plugs and going to check my ignition coils soon but so far no luck

I've heard many say the polo just runs rough by nature but I still don’t like the rough idle, I've read somewhere it could possibly be a badly seated pcv ...

SarahL77 wrote: Mon Aug 07, 2023 2:14 pm Hi, mine did this. I recharged the battery and all working again

Wish I saw this earlier as it took me a while to figure that out, recharging it fixed 2 of the 3 broken doors but one still needed a new lock

thanks tho!

Long story short my polo has been sitting for a good 2 months and now only the driver side door opens, everything else wont open

Im assuming I need to replace the locks, anyone have a tutorial on how?


Reviving this again, fixed the car lock myself after almost 10 hours of work, really useful ...

Long story short my polo has been sitting for a good 2 months and now only the driver side door opens, everything else wont open

Im assuming I need to replace the locks, anyone have a tutorial on how?