UK-POLOS.NET - THE VW Polo Forum

Hi, It’s been a while and I’ve been slowly procuring required items for this task. And gained a bit knowledge with research too. I was wondering if the pin outs(from ciclo’s pdf) is universal for all auto light switches? I saw a golf 7 switch on eBay and found that in 2020 models of my car has facto...

Thank you so much iichel, I’ll get to work then

So, my car didn’t come from the factory with static cornering lights. I enabled them using carista. I cannot find the picture of my light switch wires, but terminal 2 and 8 are thicker wires. Is there any way I can test if the light switch is powering the foglamps?

I would still need to wire a relay for the fog lamps right? I assume the oem switch bridges 2 and 8 for front fogs, as the 10 pin switch doesn’t have a slot for “contact X” and the relay bridges 2 and 8. I initially thought I didn’t need this relay, hence the confusion. Re: Q2, following the wiring ...

it makes sense that number 4 is missing (terminal 56 power supply); your stalks are very likely already in T6/VW Up! FL configuration. So you don't need the relay for the headlights/high beams. You can install the 10-pin light switch easily now, just make the conversion from 17 to 10 pin. It's very...

Hi all, So I have a 2018 skoda rapid(NA) top line and would like to retrofit auto headlights. I read through multiple auto headlight thread for polo 6r polo/polo sedan but there are a few quirks which I need help in figuring out. I also looked at ciclo’s pdf with wiring and it was very helpful, but ...