set of clocks with the rev counter and lcd clock

rpgrainger · Post by **rpgrainger** » Sat Aug 20, 2005 1:21 am

hi
my lcd clock has gone all black looking for a complete set of clocks or just the lcd clock
Cheers
Rob

Tahrey1043 · Post by **Tahrey1043** » Sat Aug 20, 2005 2:48 pm

alright dude, given this is your first post and the fairly frequent confusion that can arise over mk2 vs mk3, i have to ask.......

are your clocks this style:

or this?

...i've got a set of the second type (mk3) that i'm soon going to offer for sale, fully working. might need a top-end bulb changing but that'd be all.

rpgrainger · Post by **rpgrainger** » Sat Aug 20, 2005 7:33 pm

nice drawings.....more like picture one but the lcd clock is in the middle of the speedo and rev counter

GroovyCarrot · Post by **GroovyCarrot** » Sat Aug 20, 2005 9:26 pm

What an artist

I'll have a dig around, I might have a spare clock lying in the big bag of dashboard bits, but I think I gave it to someone a while ago. It's yours if I have one though.

Tahrey1043 · Post by **Tahrey1043** » Sun Aug 21, 2005 12:35 am

ok, a proper mk2 one

forgive the ropeyness but i couldnt be bothered finding decent pics of the two types, as it was quicker to spend 90 seconds scrawling each one, and i dont really have any reference material as regards a set of mk2s with a digital display

(what am i thinking of, then, that would be sitting at the bottom of the tacho / analogue clock??)

rpgrainger · Post by **rpgrainger** » Sun Aug 21, 2005 12:48 am

on your picture the fuel gauge and the lcd clock are in the opposite positions.......my mk2 originaly had the big old clock instead of the rev counter....not sure if a mk3 clock would work or could be made to work
cheers
Rob

Tahrey1043 · Post by **Tahrey1043** » Sun Aug 21, 2005 12:51 am

well if you're handy with a soldering iron, and can measure up / guestimate the size of the old one to check it, something might be doable..

rpgrainger · Post by **rpgrainger** » Tue Aug 23, 2005 7:18 pm

thanks for the offers...but have now located one and is now fitted
Cheers
Rob

k4lps · Post by **k4lps** » Fri Aug 26, 2005 5:25 pm

Tahrey1043 wrote:alright dude, given this is your first post and the fairly frequent confusion that can arise over mk2 vs mk3, i have to ask.......

are your clocks this style:

my lcd is in the midle

Tahrey1043 · Post by **Tahrey1043** » Sun Aug 28, 2005 4:33 am

Tahrey1043 wrote:forgive the ropeyness but i couldnt be bothered finding decent pics of the two types, as it was quicker to spend 90 seconds scrawling each one, and i dont really have any reference material as regards a set of mk2s with a digital display

rpgrainger wrote:on your picture the fuel gauge and the lcd clock are in the opposite positions