My Polo...New To The Site!

_williams_ · Post by **_williams_** » Sun Oct 30, 2005 1:17 pm

hi im new to the site, so heres some pics of my car to get started!

The cars pretty much standard at the mo, apart from the wheels and a set of black lexus lights (not shown in the pics!) got a few things planned for it, lowering it next!

let me know what u think, all opinions welcome good or bad!

polopowah · Post by **polopowah** » Mon Oct 31, 2005 3:32 pm

heya mate
welcome to the forum

nice car you have there...very clean and the alloys look brand spanking new too!
what sort of road you going down with the mods?
lowering on coilovers?
any exhaust planned?

-Ben-

badboypolo · Post by **badboypolo** » Mon Oct 31, 2005 8:24 pm

yeah m8 nice car , like the alloys they look good.

laura_fairy_22 · Post by **laura_fairy_22** » Wed Nov 02, 2005 7:27 pm

hey there!
welcome to the site!!"

DanDiesel · Post by **DanDiesel** » Fri Nov 04, 2005 10:07 am

welcome

_williams_ · Post by **_williams_** » Sat Nov 05, 2005 9:17 am

cheers for the comments

i've had the exhaust done now, got a twin 3 inch back box, and i've got my lowering springs in a box in my bedroom! only dropping it 30 mil at the mo, been told thats as low as i can go

i've also ordered some tints for it so i'll get some pics up when its all done! plans after that then are to get a set of dtm cup mirrors,change the front grill, flush the boot and smooth all the bump strips off! should hav some of this done by christmas!

dubpolo · Post by **dubpolo** » Sun Nov 06, 2005 12:25 pm

_williams_ wrote:cheers for the comments i've had the exhaust done now, got a twin 3 inch back box, and i've got my lowering springs in a box in my bedroom! only dropping it 30 mil at the mo, been told thats as low as i can go i've also ordered some tints for it so i'll get some pics up when its all done! plans after that then are to get a set of dtm cup mirrors,change the front grill, flush the boot and smooth all the bump strips off! should hav some of this done by christmas!

trust me you can go low!

polopowah · Post by **polopowah** » Sun Nov 06, 2005 4:17 pm

at a price

certainly dearer than 40mm springs!

-Ben-