Hi guys, i know this should be in the parts section, but i guess that 99.9999% of the people using that section have nice shiny MK4's and 5's, not old skool stuff!
Does anyone out there have a scrap MK1 Polo/Derby? I need a bonnet hinge bolt, it holds the bonnet hinge to the A pillar. I've just sheared one on my Derby Project and can i get one?? NO!
I'll happily pay for postage, etc....
Vic
Bolt needed for my MK1!!!
-
- Getting There!
- Posts: 57
- Joined: Mon Apr 21, 2003 6:44 pm
- Location: Midlands
-
- Getting There!
- Posts: 57
- Joined: Mon Apr 21, 2003 6:44 pm
- Location: Midlands
-
- Bling Bling Diamond Member
- Posts: 3297
- Joined: Tue Dec 10, 2002 1:01 pm
- Location: Swindon
- Contact:
k here we go assuming its the horizintal one that im looking at,
part number: 431 823 327
availability; still available at dealers (and vagparts) for £3.13
cars used on
audi 100/avant 77-79 same position
audi 100/avant 80-81 same position
audi 100/avant 82-82 same position
audi 200 80-90 same position
audi 50 75-78 same position
audi 80/90/avant 73-87 same position
audi 80/90/avant 83-87 quattro
audi coupe 81-88 same position
audi coupe quattro 85-88 same positiion
audi quattro/sport 80-91
passat/santana 74-80 same position
so i have no idea where you might find one
if your looking for an easier to find solution go into a nut and bolt store and ask for an M8 hex headded bolt and cut the threadded portion down to 24.5mm long
any help?
part number: 431 823 327
availability; still available at dealers (and vagparts) for £3.13
cars used on
audi 100/avant 77-79 same position
audi 100/avant 80-81 same position
audi 100/avant 82-82 same position
audi 200 80-90 same position
audi 50 75-78 same position
audi 80/90/avant 73-87 same position
audi 80/90/avant 83-87 quattro
audi coupe 81-88 same position
audi coupe quattro 85-88 same positiion
audi quattro/sport 80-91
passat/santana 74-80 same position
so i have no idea where you might find one
if your looking for an easier to find solution go into a nut and bolt store and ask for an M8 hex headded bolt and cut the threadded portion down to 24.5mm long
any help?
-
- Getting There!
- Posts: 57
- Joined: Mon Apr 21, 2003 6:44 pm
- Location: Midlands