do you recon the shock is at fault?
bad weekend
bad weekend
Hi all hope you are wel, my car failed an MOT because the pasanger side top bearing colapsed...so i had a garage change the bearing and the wheel bearings as they were nackered....i jacked the car up and the spring on the pasanger side is still moving
all the other springs are fine and dont move when the car is jacked up.
do you recon the shock is at fault?
do you recon the shock is at fault?
that sucks, hopefully you get it sorted
my car went through 7 mot's last year as the wheels were rubbing on full lock
initial mot failed
knocked it back with a hammer, still not enough
fitted 3mm spacers too, still not enough
bought a grinder and went nuts, still not enough
went too nuts and made a couple of little holes, failed on having couple of holes
filled it in with body filler and went back, has to be welded and still not enough
got bodyshop to cut out section and weld in a shaped plate and still had 3mm spacers on, just enough
vw centre were alright about it though, got the 6 re-tests for free
my car went through 7 mot's last year as the wheels were rubbing on full lock
initial mot failed
knocked it back with a hammer, still not enough
fitted 3mm spacers too, still not enough
bought a grinder and went nuts, still not enough
went too nuts and made a couple of little holes, failed on having couple of holes
filled it in with body filler and went back, has to be welded and still not enough
got bodyshop to cut out section and weld in a shaped plate and still had 3mm spacers on, just enough
vw centre were alright about it though, got the 6 re-tests for free
-
mysteryboy
- Bling Bling Diamond Member
- Posts: 2673
- Joined: Sat Jul 02, 2005 11:46 pm
- Location: London Drives: MK4 8V Hates: Speed Bumps
- Contact:
-
OMEGASUPR3ME
- Silver Member
- Posts: 471
- Joined: Wed Oct 12, 2005 4:49 pm
- Location: Wales