no amp power

badboypolo · Post by **badboypolo** » Mon Jan 02, 2006 2:05 pm

just wired everything up and there is now power going to my amp? any ideas?

ModifiedMadness · Post by **ModifiedMadness** » Mon Jan 02, 2006 2:09 pm

Check your remote cable is connected where it should be, that's the problem I had.

badboypolo · Post by **badboypolo** » Mon Jan 02, 2006 2:32 pm

from the amp to where? the remote cable very thin blue wire?

James0121 · Post by **James0121** » Mon Jan 02, 2006 2:41 pm

mine goes from the amp to the back of the headunit and yes thin blue wire

ModifiedMadness · Post by **ModifiedMadness** » Mon Jan 02, 2006 2:54 pm

As above, it will be the thin blue wire, it runs from the "remote on", on your amp to usually a blue ignition wire connected to the head unit (see manual)

badboypolo · Post by **badboypolo** » Mon Jan 02, 2006 3:37 pm

thanks a lot, thats me up n running!

ModifiedMadness · Post by **ModifiedMadness** » Mon Jan 02, 2006 3:51 pm

Was it not connected?

badboypolo · Post by **badboypolo** » Mon Jan 02, 2006 6:58 pm

wasnt conected, and would never have known to connect it to the blue and white wire. cheers m8

ModifiedMadness · Post by **ModifiedMadness** » Mon Jan 02, 2006 7:43 pm

No worries, I had that trouble, only mine was connected just not to the right wire from the H/U

This time in the Polo www.sqplus.com are going to be doing it for me.