URGENT!!!!

OMEGASUPR3ME · Post by **OMEGASUPR3ME** » Mon Jan 02, 2006 1:10 pm

hey there ladies n gents! i need to tighten me wheelbolts coz ive driven 100miles with my new alloys and u need to retighten them afta 100miles, and i dunno what torque it needs to b tightend to, left my haynes at a mates house

im thinkin its around 90-95Nm. will b doin it 2day so need this asap. thanks!

DScape · Post by **DScape** » Mon Jan 02, 2006 1:58 pm

Haynes manual says - 110Nm / 81lbf ft.

OMEGASUPR3ME · Post by **OMEGASUPR3ME** » Mon Jan 02, 2006 2:16 pm

god bless u dscape! lol, r urs dun do that? coz i have same wheels and prob same bolt lol

DScape · Post by **DScape** » Mon Jan 02, 2006 5:47 pm

Mine are done to the force of whatever they were put on as....defo not the right torque setting

mysteryboy · Post by **mysteryboy** » Mon Jan 02, 2006 5:51 pm

I forgot to do mine.... did them today funnily enough... my so called wheel locking nut came out in one turn

... the others were still tight... I tightened them as hard as I could...

OMEGASUPR3ME · Post by **OMEGASUPR3ME** » Mon Jan 02, 2006 6:53 pm

did mine 2day coz there was this sound comin from one of them when i was drivin, sounded a bit like knockin but like "og og og og og" lol, tightend my bolts and no more sound

the bolts on one wheel were seriously like a 60yr old slapper! lol

wesley666 · Post by **wesley666** » Wed Jan 04, 2006 9:18 am

I had problem with mine, making a noise when i drove

So i tightened them, but that didnt help so took wheel off then put back on and retightened nuts

And now my brake on one side makes a knocking noise when i break any ideas what this is?

Cheers wesley