breaks

OMEGASUPR3ME · Post by **OMEGASUPR3ME** » Mon Jan 02, 2006 9:20 pm

hey guys n galls! there was a post on here a while ago about break pads and where to get em from and what types to get etc. i didnt have a place saved on my faves but i formatted so i lost it

. cant remember who posted it either and cant find the thread

i desperately need pads as mine r bout as thin as i am fat! i wanna get sum fast road ones as im a bit heavy on the breaks lol, im gettin these to hold me ova til i get the g60 setup

AKs_SlickPolo · Post by **AKs_SlickPolo** » Mon Jan 02, 2006 9:24 pm

Hey, go to GSF car parts and grab your self some PAGID brake pads cheap!!!!! If u need brake discs then go for the Brembo discs they do too!!!! i very highly recommend this setup as i had this on my old MK4 and they were ace!

OMEGASUPR3ME · Post by **OMEGASUPR3ME** » Mon Jan 02, 2006 9:50 pm

thanks AK, they dont seem to have the fast road pads for the 1.4 8v. r they the same as the 16v coz they have them item # 64520F? what do peeps think? and do bremo discs properly work with pads that fit the mkIV?

AKs_SlickPolo · Post by **AKs_SlickPolo** » Mon Jan 02, 2006 10:44 pm

I managed to get em. Best thing is to go in store and ask them. maybe they not listed on website?!

As for discs, i just got the brembo ones. NOT max ones. I dont think 16v ones work dude

mk4po-low · Post by **mk4po-low** » Mon Jan 02, 2006 10:57 pm

dumb question.............whenever i break, they squeak like hell, ive just had my pads and disks done recently, what is it and what do i do to sort it?

DScape · Post by **DScape** » Mon Jan 02, 2006 11:24 pm

mk4po-low wrote:dumb question.............whenever i break, they squeak like hell, ive just had my pads and disks done recently, what is it and what do i do to sort it?

Could be brake dust build up dude, or whoever fitted the pads didn't use copper grease.

OMEGASUPR3ME · Post by **OMEGASUPR3ME** » Mon Jan 02, 2006 11:40 pm

i cant find ones for the mk4 on gsf! dont have the product code do u mate?

DScape · Post by **DScape** » Tue Jan 03, 2006 12:16 am

OMEGASUPR3ME wrote: i cant find ones for the mk4 on gsf! dont have the product code do u mate?

Had a look in the catalogue for ya but the performance pads aint there for any Polos

Best thing to do is go in and ask if you have one local, they'll more than likely order you some in

OMEGASUPR3ME · Post by **OMEGASUPR3ME** » Tue Jan 03, 2006 12:31 am

wah, well there aint one local, bout an hours drive

, i cant even see any normal road pads on there!

AKs_SlickPolo · Post by **AKs_SlickPolo** » Tue Jan 03, 2006 12:45 pm

they defo do the fast road pads geez, as i got em previously, unless they recently stopped em

I bought them instore though. I fitted them myself, so i may have the box somewhere in the garage, as i tend to chuck the old parts in the garage (dunno why? lol) ill have a look for it in a bit and see if i got a p/n on there

OMEGASUPR3ME · Post by **OMEGASUPR3ME** » Tue Jan 03, 2006 12:46 pm

thanks AK, will really help me out as i dont fancy the drive to swansea just for pads lol

toXXin · Post by **toXXin** » Tue Jan 03, 2006 2:52 pm

ECP's site is so easy to work, you put in the car details first!

It's not like GSF's site where you have to hunt them out of a long list!

I recommend ATE discs and pads. They're the OE ones made by the people who make most of the calipers.

I've been running them in many of my previous cars with no problems.

AKs_SlickPolo · Post by **AKs_SlickPolo** » Tue Jan 03, 2006 3:20 pm

I cant seem to find the p/n for the PAGID fast roads mate, must have chucked the box out

.

I went onto the website and they dont list em. But they have the normal road ones. Ive used these too and they were very good too.

the part number for them is 64256A for the set. Im assuming ures is a 60bhp 1.4 8v?

OMEGASUPR3ME · Post by **OMEGASUPR3ME** » Tue Jan 03, 2006 6:30 pm

thanks AK eys i am a 8valver

lol

orderd