another suspension question

Chat about your MKV (6N2) Polo
Post Reply
danny_boy
Silver Member
Posts: 361
Joined: Tue Oct 25, 2005 8:24 am

another suspension question

Post by danny_boy »

hey ppl i have finally decided to go for either a 60 or 50mm drop on my 6n2 but does anybody know the best place to get hold of a kit (shocks and springs) ive been looking about on the net and i cant find anywher that does them. thers plenty for the 6n tho :?
any ideas?
ViKz
Getting There!
Posts: 56
Joined: Tue Dec 13, 2005 4:21 pm

Post by ViKz »

don't the 6n ones fit the 6n2? ring up the company that is advertising them and ask them?
Demo_202
Getting There!
Posts: 73
Joined: Thu Jan 26, 2006 6:54 pm
Location: Glasgow

Post by Demo_202 »

Dont think so. The rear ones do but the fronts dont, or vice versa i think it is!
sorted
Gold Member
Posts: 794
Joined: Tue Apr 13, 2004 4:34 pm
Location: Glasgow

Post by sorted »

Hello

Yes the 6n and 6n2 use the same rear springs. The front ones do not. On the 6n the front springs cup mount is smaller, as i found out :). What i did do to the first set i had was pull them out a bit with some heat to fit the 6n2 top cup.

Then i took them off and put some 50mm on (6n2 ones) as the 30mm wasnt low enough.

Neil.
danny_boy
Silver Member
Posts: 361
Joined: Tue Oct 25, 2005 8:24 am

Post by danny_boy »

ah rite, surely somewher must just make the whole kit for the 6n2
Si_GTi
Moderator
Posts: 5020
Joined: Thu Apr 08, 2004 1:14 pm
Location: Shropshire

Post by Si_GTi »

danny_boy wrote:ah rite, surely somewher must just make the whole kit for the 6n2
The only one I've seen advertised is on Awesome GTI's website. Go to the Polo 6n2 pages, click on Suspension and there is a Koni kit listed about halfway down, for £310.

Cheers
danny_boy
Silver Member
Posts: 361
Joined: Tue Oct 25, 2005 8:24 am

Post by danny_boy »

cheers mate but its only a 35mm drop tho, i want at 50 or 60mm
Si_GTi
Moderator
Posts: 5020
Joined: Thu Apr 08, 2004 1:14 pm
Location: Shropshire

Post by Si_GTi »

danny_boy wrote:cheers mate but its only a 35mm drop tho, i want at 50 or 60mm
You'll need coilovers then, really. :wink:
danny_boy
Silver Member
Posts: 361
Joined: Tue Oct 25, 2005 8:24 am

Post by danny_boy »

cant afford them :cry:
mysteryboy
Bling Bling Diamond Member
Posts: 2673
Joined: Sat Jul 02, 2005 11:46 pm
Location: London Drives: MK4 8V Hates: Speed Bumps
Contact:

Post by mysteryboy »

Si_GTi wrote:
danny_boy wrote:cheers mate but its only a 35mm drop tho, i want at 50 or 60mm
You'll need coilovers then, really. :wink:
Nope, There's suspension kits around offering a drop up to -60mm.

http://cgi.ebay.co.uk/VW-Polo-MK4-6N2-9 ... dZViewItem

If you have the dosh for coilovers... then even better.... drop it -90mm odd :wink:
danny_boy
Silver Member
Posts: 361
Joined: Tue Oct 25, 2005 8:24 am

Post by danny_boy »

yea but that 60 at the front and only 40 at the back :? will this look low?
Post Reply