6n2 lowered 60mm on 195/50/R15

Demo_202 · Post by **Demo_202** » Sun Feb 19, 2006 6:15 pm

Should i expect any rubbing?

And with a full load?

Cheers

ModifiedMadness · Post by **ModifiedMadness** » Sun Feb 19, 2006 6:23 pm

Have you thought about 195/45/15?

DanDiesel · Post by **DanDiesel** » Sun Feb 19, 2006 6:24 pm

have u already got this or is this what ur planning?
coz most people go for 195/45/15!
best person to speak to is ben aka polopowah! he is quite low (and that is just some of his jokes

)

Demo_202 · Post by **Demo_202** » Sun Feb 19, 2006 7:08 pm

The lowering 60mm is planned, and thats just the tyres the wheels came with...

Scrubbing on full lock aswell as with passengers then?

Demo_202 · Post by **Demo_202** » Sun Feb 19, 2006 7:12 pm

ET 35

ViKz · Post by **ViKz** » Sun Feb 19, 2006 8:33 pm

yep be ready for scrubbing on a full lock, mine was down 60mm with 195/50/15 tyres and i got scrubbing!

PhilGTi · Post by **PhilGTi** » Sun Feb 19, 2006 8:54 pm

Hmm... im down 90mm and mine dont, 195/45/15 7.5" wheels

Demo_202 · Post by **Demo_202** » Mon Feb 20, 2006 12:08 am

Is it the inside of the arch were talking about here?
Rather than like the top if i have passengers etc?

Would i solve the problem if i used a heatgun and moulded the arch lining?

jon_poloV · Post by **jon_poloV** » Mon Feb 20, 2006 6:24 pm

PhilGTi wrote:OK so my polo now sits -85mm... looks great, i would say this is defo the perfect height!

However, man it rubs like ****!! When turning, not sure whats up... maybe camber or somethings out.

thought urs did rub tho phil?

yes it will defo rub with that profile of tyre, you would need a thinner tyer eg a 45 profile.
Jon

Demo_202 · Post by **Demo_202** » Tue Feb 21, 2006 10:02 am

Is this on the inside of the arch? and will it be bad?
cheers!

polopowah · Post by **polopowah** » Thu Feb 23, 2006 12:00 pm

-75mm on 16's 195,45,16 no rubbing except when i have two people in the back, rubs on full lock in reverse, and my exhaust catches every speedbump

-Ben-

mysteryboy · Post by **mysteryboy** » Thu Feb 23, 2006 2:53 pm

polopowah wrote: and my exhaust catches every speedbump

-Ben-

these moments are when your face cringes....

(Chuck some people out while you go over, then let them back in)

Demo_202 · Post by **Demo_202** » Thu Feb 23, 2006 5:38 pm

polopowah wrote:-75mm on 16's 195,45,16 no rubbing except when i have two people in the back, rubs on full lock in reverse, and my exhaust catches every speedbump

-Ben-

Have you tried using a heat gun to reshape the arche's like Phill did?

I take its that were mine would rub, on the inside of the arch? I should have any problems with speed bumps, but reckon a 45mm drop would ve best (i often have a full car) ?

Cheers!

polopowah · Post by **polopowah** » Thu Feb 23, 2006 8:34 pm

you see i have no friends so its a win win situation

joking apart i regularly argue the case that i can't take 4 other people in my car because some crazy fool has cut my springs!

-Ben-

DanDiesel · Post by **DanDiesel** » Thu Feb 23, 2006 11:29 pm

i used to like catching my exhaust on speed bumps especially infront of barry boy corsa and novas!
they'd laugh coz i made a funny noise and i'd laugh coz they're car is not low enough to catch a speed bump