got my spoiler!!

vdubyabush · Post by **vdubyabush** » Fri Feb 17, 2006 2:45 pm

got my spoiler, its the 1 with the brakelight too :d

just wondering guys? i have a rough idea but how would i go about fitting it?

nutter guy · Post by **nutter guy** » Sun Feb 19, 2006 2:12 am

get some pics up mate so we sould see wich one my zender is only glued on with some 'prfessional' bodywork stuff my mate has in his work shop

mysteryboy · Post by **mysteryboy** » Sun Feb 19, 2006 12:06 pm

you've just created yourself a whole loads of work & hassle lol... but the finished product will make it all worth it...

I think mines glued on aswell....

vdubyabush · Post by **vdubyabush** » Sun Feb 19, 2006 4:54 pm

managed to find them out from the ebay auction ..

the guy who ran the auction had this to say..

Should take less than an hour to install, just 4 holes to drill, 3 holes to bolt it down and the 4th for the brake light wire. Thier is however only 2 securing bolts included with the spoiler as the 3rd bolt has been lost, shouldnt be a problem to find a new bolt to fit.

hope the pics help you guys work out which i have lol am priming it up 2nite

mysteryboy · Post by **mysteryboy** » Mon Feb 20, 2006 12:54 am

I Don't know about drilling holes... Dodgy business unless you know what you're doing.
I got some sticky pads with my plates... & boy do they stick.... Seriously...you couldn't nick them in a hurry... I'd recommend getting some of these pads (or if you know what glue to use then that would probably be wiser).

Are you gonna be spraying it yourself? (what colour is your car?)

nutter guy · Post by **nutter guy** » Mon Feb 20, 2006 1:49 am

i cant help with the glue side i dont know which he used on mine but there is some stuff out there to do it

vdubyabush · Post by **vdubyabush** » Mon Feb 20, 2006 2:26 am

where do you get these pads from?? my cars "pacific blue" and yeh going to spray it myself well my friend is with me, hopefully gona do the rub strips and bottom splitter while am at it

Giorgio · Post by **Giorgio** » Mon Feb 20, 2006 8:31 am

vdubyabush wrote:where do you get these pads from?? my cars "pacific blue" and yeh going to spray it myself well my friend is with me, hopefully gona do the rub strips and bottom splitter while am at it

DONT start spraying things all over the place. Your car will look like a patch work quilt. As a realsprayer how to do it.

vdubyabush · Post by **vdubyabush** » Mon Feb 20, 2006 11:15 am

lol the mate i said doing it works for audi in the paintshop mate, and i am asking him, i like to say me as well so i feel involved

Giorgio · Post by **Giorgio** » Mon Feb 20, 2006 11:31 am

vdubyabush wrote:lol the mate i said doing it works for audi in the paintshop mate, and i am asking him, i like to say me as well so i feel involved

When you said mate I thought you ment guy with a spray can

vdubyabush · Post by **vdubyabush** » Mon Feb 20, 2006 12:11 pm

lol nah man, not cheap wid my polo

still waitin for a reply about them sticky pads i guess hes at work

mysteryboy · Post by **mysteryboy** » Mon Feb 20, 2006 3:08 pm

PM'ed the link

laura_fairy_22 · Post by **laura_fairy_22** » Mon Feb 20, 2006 4:14 pm

vdubyabush wrote: the guy who ran the auction had this to say..

Should take less than an hour to install, just 4 holes to drill, 3 holes to bolt it down and the 4th for the brake light wire. Thier is however only 2 securing bolts included with the spoiler as the 3rd bolt has been lost, shouldnt be a problem to find a new bolt to fit.

I was bidding on this too!!

vdubyabush · Post by **vdubyabush** » Mon Feb 20, 2006 6:56 pm

lol, was it you!

sorry

Biddle · Post by **Biddle** » Tue Feb 21, 2006 6:19 pm

I got a spoiler today when some guy in a 306 came long side me and offered to sell me a spoiler. I weren't complaining as it only cost me a tenner and it's presprayed the colour of my car. ust wondering now though around how much is the brake light to fit it, as it didn't come with one?

UK-POLOS.NET - THE VW Polo Forum

got my spoiler!!

got my spoiler!!

pics

Re: pics